A part of Merck

KHGEG2ZTH1 | Opticap® Gamma Compatible XLT 20 Millipore Express® SHC 0.5/0.2 µmum TC/HB 1pk w/gauge port

KHGEG2ZTH1
1  Double Easy-Open bag
Recuperando precio...
No pudo obtenerse el precio
La cantidad mínima tiene que ser múltiplo de
Al finalizar el pedido Más información
Ahorró ()
 
Solicitar precio
Disponibilidad a confirmarDisponibilidad a confirmar
En existencia 
Suspendido
Cantidades limitadas disponibles
Debe confirmarse disponibilidad
    El resto: se avisará
      El resto: se avisará
      Se avisará
      Póngase en contacto con el Servicio de Atención al Cliente

       

      Póngase en contacto con el Servicio de Atención al Cliente

      Click To Print This Page

      Descripción

      Replacement Information

      Tabla espec. clave

      Description
      Catalogue NumberKHGEG2ZTH1
      Trade Name
      • Millipore Express®
      DescriptionOpticap® Gamma Compatible XLT 20 Millipore Express® SHC 0.5/0.2 µmum TC/HB 1pk w/gauge port
      References
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/Outlet38 mm (1-1/2 in.) Sanitary Flange/16 mm (5/8 in.) Hose Barb
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal; 3/4 in. Gauge Port T-Line Side
      Housing MaterialPolypropylene (PP)
      Maximum Inlet Pressure, bar (psi)6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      T-line/Gauge PortT-line with 3/4 in. Gauge Port T-line side
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaMillipore Express® SHC
      SterilityGamma
      Sterilization3 autoclave cycles of 60 min @ 126 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.5 / 0.2 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionHose Barb
      Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Differential PressureForward: 5500 mbar (80 psi) @ 25 °C; 1000 bar (15 psi) @ 80 °C; 6900 mbar (100 psi) @ 25 °C, intermittent. Reverse: 2100 bar (30 psi) @ 25 °C, intermittent
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      TOC/ConductivityAfter sterilization and a controlled water flush of 42 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length20 in. (50 cm)
      Length62.5 cm (24.6 in.)
      Diameter19.8 cm (7.8 in.)
      Filtration Area1.09 m²
      Device Size20 in.
      Inlet Connection Diameter1-1/2 in.
      Outlet Connection Diameter5/8 in.
      Materials Information
      Chemistry
      • Polyethersulfone (PES)
      Device Material
      • Polypropylene/Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolyester
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥4 L