|Optiseal® Cartridge Filters with Aervent® Membrane|
Aervent® Membrane in Optiseal® FiltersOptiseal filters with Aervent membrane are designed for sterilizing applications, removing particles and microorganisms from gases and solvents.
Learn More >>
Millidisk® Sanitary Cartridge HousingsThese cartridge housings are designed to handle the most critical sterile filtration steps for industrial processing applications.
Learn More >>
Aervent Hydrophobic Cartridge and Disposable Capsule FiltersSuperior filters for the sterile filtration of gases.
Learn More >>
Related Products By: Application Facete
|Dialysis and Filtration|
|Process Water Analysis|
Related Products By: Brand Facete
|Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Gas > Aervent|
Optiseal™-M filters with Aervent™ membrane are 0.2 µm hydrophobic cartridges. They are designed for sterilizing applications, removing particles and microorganisms from gases and solvents. They are made with PTFE membrane and polypropylene components for broad application compatibility. Optiseal-M filters with Aervent membrane are designed to be used with Millidisk housings.
Each unit is 100% integrity tested during manufacturing to guarantee integrity. Optiseal-M filters with Aervent membrane are designed, developed and manufactured in accordance with a Quality Management System approved by an accredited registered body to an ISO® 9000 Quality Systems Standard.
Optiseal-M Aervent hydrophobic cartridges will remove particles and microorganisms from gases and liquids for low flow rates. In gases this filter will remove contamination down to 0.01 µm.
- Sterile tank venting such as fruit containers transportation or fruit juice storage
- Fermentation air applications
- Bioreactor inlet and outlet filtration
- Sterile process gases
|Materials of Construction|
|Filter Membrane||Polytetrafluoroethylene (PTFE)|
|Pore Size||0.2 µm|
|Filtration Area||0.05 m²|
|Maximum Differential Pressure, bar (psid)||Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 4.1 bar (60 psid)|
|Bubble Point at 23 °C||≥1100 mbar (16 psig) nitrogen with 70/30 % IPA/water|
|Bacterial Retention||Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.|
|Sterilization||80 (40 forward/40 reverse) SIP cycles of 30 min @ 135 °C|
|Good Manufacturing Practices||These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.|
|Non-Fiber Releasing||Component materials meet the "non-fiber releasing" criteria as defined in 21 CFR 210.3 (b) (6).|
|Component Material Toxicity||Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride extraction.|
|Certificate of Quality||Each cartridge is shipped with a Certificate of Quality which summarizes our stringent manufacturing and quality standards.|