Synergy® systems are designed for laboratories that already have access to purified water and need a point-of-use system to supply ultrapure water.
With the Synergy® range of water purification systems, you benefit from a choice of ultrapure water configurations. All systems produce Type 1 water (18.2 MΩ•cm at 25 °C ultrapure water) on demand from pretreated water. For applications sensitive to organic contaminants, a UV version of the Synergy® system is also available. It incorporates a dual wavelength UV lamp for photooxidation of organic compounds. A final purification step at the point-of-dispense removes specific contaminants critical for your experiments. A range of purification cartridges and Application-Paks is available for you to select according to your requirements.
Simple handling & maintenance
- Easy installation anywhere in your laboratory with its compact design and optional remote dispenser. Either wall-mounted, on or under the bench, choose the setup that is most convenient for your daily work.
- Dispensing adapted to different size laboratory glassware at an instant flow rate of 1.5 L/min.
- Save time thanks to the volumetric function. It will automatically deliver the water volume that you requested.
- Easily insert your pack in one movement with the patented locking mechanism.
For full confidence in your Synergy® system, it is delivered a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. In addition, all Synergy® consumables are delivered with their Certificate of Quality. The manufacturing site is ISO® 9001 v.2000 and ISO® 140001 certified.
Synergy® ultrapure water (Type 1)
|Resistivity at 25 °C||18.2 MΩ•cm|
|TOC1 (Synergy® system)||≤ 10 ppb|
|TOC1 (Synergy® UV system)||≤ 5 ppb|
|Particulates (size > 0.22 µm)2||< 1 particulate/mL|
|Bacteria (Synergy® system)2||< 0.1 CFU/mL|
|Bacteria (Synergy® UV system) 3||< 0.01 CFU/mL|
|Pyrogens (endotoxins)3||< 0.001 EU/mL|
|RNases3||< 0.01 ng/mL|
|DNases3||< 4 pg/µL|
|Flow Rate||> 1.5 L/min|
|1in the appropriate test conditions
2with Millipak® final filter
3with Biopak® polisher
These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water.
|Feed water quality||Elix®, RiOs™, distilled or DI water with conductivity < 100 µS/cm and TOC < 50 ppb|
|Feed water connection||½” Gaz M|
|Feed water pressure *||0 - 0.3 bar|
|Feed water temperature||5 - 35 °C|
|* For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower.|
|Dimensions (H x W x D)||540 x 290 x 380 mm (21.3 x 11.4 x 15 in)|
|Operating weight (Synergy® systems)||9.7 kg (21.4 lb)|
|Operating weight (Synergy® UV system)||10.2 kg (22.5 lb)|
|Operating weight (Remote dispenser)||2.68 kg (5.91 lb)|
|Electrical power supply voltage||100 - 250 V +/- 10 %|
|Electrical power supply frequency||50 - 60 Hz +/- 10 %|
The Synergy® systems are tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The Synergy® systems are built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site (http://www.ul.com).