Cartouches Millidisk

Designed for the removal of particles and microorganisms from liquids and gases.

Aperçu

Caractéristiques

Guide d'achat

Go
Cartouches Millidisk avec membrane Durapore hydrophile 0,1 µm Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
MCVL10S03Cartouche de filtration Millidisk Durapore hydrophile, 0,1 µm, 10 disques empilés 3 Prix & Disponibilité
MCVL20S03Cartouche de filtration Millidisk Durapore hydrophile, 0,1 µm, 20 disques empilés 3 Prix & Disponibilité
MCVL40S03Cartouche de filtration Millidisk Durapore hydrophile, 0,1 µm, 40 disques empilés 3 Prix & Disponibilité

Retourner en haut de la page

Cartouches Millidisk avec membrane Durapore hydrophile 0,22 µm Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
MCGL10S03Cartouche de filtration Millidisk Durapore hydrophile, 0,22 µm, 10 disques empilés 3 Prix & Disponibilité
MCGL20S03Cartouche de filtration Millidisk Durapore hydrophile, 0,22 µm, 20 disques empilés 3 Prix & Disponibilité
MCGL30S03Cartouche de filtration Millidisk Durapore hydrophile, 0,22 µm, 30 disques empilés 3 Prix & Disponibilité
MCGL40S03Cartouche de filtration Millidisk Durapore hydrophile, 0,22 µm, 40 disques empilés 3 Prix & Disponibilité

Retourner en haut de la page

Cartouches Millidisk avec membrane Durapore hydrophile 0,45 µm Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
MCHL10S03Cartouche de filtration Millidisk Durapore hydrophile, 0,45 µm, 10 disques empilés 3 Prix & Disponibilité
MCHL20S03Cartouche de filtration Millidisk Durapore hydrophile, 0,45 µm, 20 disques empilés 3 Prix & Disponibilité
MCHL30S03Cartouche de filtration Millidisk Durapore hydrophile, 0,45 µm, 30 disques empilés 3 Prix & Disponibilité
MCHL40S03Cartouche de filtration Millidisk Durapore hydrophile, 0,45 µm, 40 disques empilés 3 Prix & Disponibilité

Retourner en haut de la page

Cartouches Millidisk avec membrane Durapore hydrophile 5,0 µm Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
MCSL10S02Cartouche de filtration Millidisk Durapore hydrophile 5,0 µm, 10 disques empilés 2 Prix & Disponibilité
MCSL20S02Cartouche de filtration Millidisk Durapore hydrophile 5,0 µm, 20 disques empilés 2 Prix & Disponibilité
MCSL30S01Cartouche de filtration Millidisk Durapore hydrophile 5,0 µm, 30 disques empilés 1 Prix & Disponibilité
MCSL40S01Cartouche de filtration Millidisk Durapore hydrophile 5,0 µm, 40 disques empilés 1 Prix & Disponibilité

Retourner en haut de la page

Cartouches Millidisk avec membrane Durapore hydrophobe 0,22 µm Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
MCGB10S02Cartouche de filtration Millidisk Durapore hydrophobe, 0,22 µm, 10 disques empilés 2 Prix & Disponibilité
MCGB20S02Cartouche de filtration Millidisk Durapore hydrophobe, 0,22 µm, 20 disques empilés 2 Prix & Disponibilité
MCGB30S01Cartouche de filtration Millidisk Durapore hydrophobe, 0,22 µm, 30 disques empilés 1 Prix & Disponibilité
MCGB40S01Cartouche de filtration Millidisk Durapore hydrophobe, 0,22 µm, 40 disques empilés 1 Prix & Disponibilité

Retourner en haut de la page

    Documentation

    Material Qualification Dossier

    Titre

    Brochure

    Titre
    The science of managing change for filters

    Informations techniques

    Titre
    Application Note: Integrity Test Troubleshooting - Beyond Rewet and Retest
    Establishing Product Specific Bubble Point Specifications For Sterilizing-Grade (0.22 µm) Durapore® Filters
    Filter Integrity Test Methods

    Fiche technique

    Titre
    Millidisk® Cartridges and Millipak® Disposable Capsules Merck)
    Sanitary Millidisk® Filter Housings

    FAQ

    QuestionRéponse
    What is the compatibility of Durapore with high pH solutions?The upper recommended pH limit for Durapore membranes is 10. At pH >10, the hydrophilization layer of the membrane may become subject to hydrolysis. The extent of hydrolysis is a function of time, temperature , concentration and time of exposure. Upon exposure to high pH, the hydrophylization layer can swell which could result in a loss of permeability or flux. The hydrolysis of the hydrophilic layer will also lead to increased extractables from the membrane.
    What are Millipore's general recommendations for filtering high pH solutions?For applications involving pH > 10, Millipore recommends the use or our PES membranes Express SHF or Express SHC. For information on these filters :

    Express SHF: http://www.millipore.com/catalogue.nsf/docs/C8873
    Express SHC: http://www.millipore.com/catalogue.nsf/docs/C9146
    How can I differentiate filter plugging due to air bubbles, particulates, surface tension, inappropriate filter size, etc.?Air locking will occur when filtration is initiated without adequate venting or when air bubbles become trapped in fluid lines. Air will pass easily through a dry hydrophillic or hydrophobic filter. However, when a filter is wet and air is applied to a surface, the air will remain until it is manually moved upstream by venting or until the bubble point of the filter is reached. Bubble point is defined as the pressure at which gas displaces liquid for the largest set of filter pores and is able to flow through the pores. Air locking reduces the effective filtration area of the filter and thus reduces the flow rate.

    Surface tension refers to the strong cohesive forces present between molecules at the surface of a liquid. The higher the surface tension, the more force is required to force fluid through the membrane..

    Innapropriate filter size will can cause a filter to plug prematurely. Filter pore size is chosen based on the application. If the application requires a sterile fluid, than a 0.22 micron membrane would be used for standard solutions that have bacterial bioburden. A 0.1 micron filter would be used for applications where mycoplasma is a concern. Where virus contamination is a concern, ultrafiltration would be required. The selection of a filter pore size that is smaller than that required for the application will cause a decrease in filter capacity and an increase in cost.
    Why are there no diffusion specifications on my Millipak/Millidisk/4" Opticap?Diffusion testing is proportional to the overall effective filtration areas. On small area devices (less than 2000 cm2) the diffusion flow rate is relatively small. This small flow rate will be difficult to accurately measure and therefore only a bubble point specifications is provided.

    Manuels d'utilisation

    Titre
    Hydrophilic Durapore® Cartridges and Capsules User Guide
    Wetting Instructions for Filter Units with Durapore Membrane

    Produits & Applications associés

    Familles de produits

    Produits associés classés par : Application Facete

    Produits associés classés par : Brand Facete

    Catégories

    Biopharmaceutical Manufacturing > Upstream Processing > Bioburden Reduction / Particulate Control > Membrane based > Durapore