A part of Merck

CCGL02TP1 | Charged Durapore® Cartridge 20 in. 0.22 µm Code 0

1  Double Easy-Open bag
Pobieranie ceny...
Nie udało się pobrać ceny
Minimum Quantity needs to be mulitiple of
Na zapytanie Więcej informacji
Zapisano ()
Poproś o podanie ceny netto
Niedostępny w magazynie PLNiedostępny w magazynie PL
Dostępny w magazynie 
Dostępna ograniczona ilość
Dostępność będzie potwierdzona
    Remaining : Will advise
      Remaining : Will advise
      Skontaktuj się z Zespołem Obsługi Klienta


      Skontaktuj się z Zespołem Obsługi Klienta

      Kliknij, aby wydrukować tę stronę


      Replacement Information

      Tabela kluczowych gatunków

      Catalogue NumberCCGL02TP1
      Trade Name
      • Durapore®
      DescriptionCharged Durapore® Cartridge 20 in. 0.22 µm Code 0
      Product Information
      Device ConfigurationCartridge
      Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C
      Cartridge CodeCode 0 (2-222) O-rings
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaCharged Durapore®
      Sterilization10 SIP cycles of 30 min @ 135 °C
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      Physicochemical Information
      Pore Size0.22 µm
      Air Diffusion at 23 °C≤20 mL/min @ 2.1 bar (30 psig) in water
      Bubble Point at 23 °C≥2760 mbar (40 psig) air with water
      Flow Rate45 L/min @ 600 mbar ΔP
      Gravimetric ExtractablesThe extractables level was equal to or less than 20 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
      Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Cartridge Nominal Length20 in. (50 cm)
      Diameter6.9 cm (2.7 in.)
      Filtration Area1.38 m²
      Device Size20 in.
      Materials Information
      • Polyvinylidene Fluoride (PVDF)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolypropylene
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL


      Certificates of Quality

      Charged Durapore Cartridge
      Charged Durapore Cartridge
      Charged Durapore Cartridge
      Charged Durapore Cartridge C5DA87308
      Charged Durapore Cartridge - C2NA91036
      Charged Durapore Cartridge - C2PA09092
      Charged Durapore Cartridge - C3AA21802
      Charged Durapore Cartridge - C3BA49824
      Charged Durapore Cartridge - C3CA90581
      Charged Durapore Cartridge - C3EA09628

      Technical Info

      Bubble Point Test Method Using Durapore® 0.22 µm Hydrophilic Membrane with 60/40 IPA

      Data Sheet

      Charged Durapore® Hydrophilic 0.22 μm Cartridge Filters

      Powiązane produkty i zastosowania

      Product Families


      Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Liquid > Durapore