ICP multi-element standard solution IV
(23 elements in diluted nitric acid) 1000 mg/l: Ag, Al, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, In, K, Li, Mg, Mn, Na, Ni, Pb, Sr, Tl, Zn Certipur®
For general questions please contact our Customer Service:
Frankfurter Str. 250
Phone: +49 6151 72-0
Fax: +49 6151 72 2000
17 April 2014
|100441||Nitric acid 65% Suprapur®|
|101518||Nitric acid 60% Ultrapur|
|Alternative products for ICP multi-element standard solution IV|
|HS Code||3822 00 00|
|Chemical and physical data|
|Solubility||(20 °C) soluble|
|Density||1.09 g/cm3 (20 °C)|
|pH value||1 (H2O, 20 °C)|
|Safety information according to GHS|
H350i: May cause cancer by inhalation.
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H373: May cause damage to organs through prolonged or repeated exposure.
H411: Toxic to aquatic life with long lasting effects.
P201: Obtain special instructions before use.
P273: Avoid release to the environment.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
|Storage class||6.1 D Non combustible, acute toxicity cat. 3 / toxic or substances with chronic effects|
|WGK||WGK 2 water endangering|
Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.
May cause cancer by inhalation.Also harmful by inhalation and if swallowed.Also harmful: danger of serious damage to health by prolonged exposure through inhalation.Causes burns.May cause sensitisation by skin contact.Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Avoid exposure - obtain special instructions before use.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).Avoid release to the environment. Refer to special instructions/ Safety data sheets.
|Categories of danger||carcinogenic, harmful, corrosive, sensitizing, dangerous for the environment|
|Declaration (railroad and road) ADR, RID||UN 3264 Ätzender saurer anorganischer flüssiger Stoff, n.a.g.(COBALTNITRAT UND ENTH. SALPETERSAEURE), 8, II|
|Declaration (transport by sea) IMDG-Code||UN 3264 CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.(COBALT NITRATE AND CONT. NITRIC ACID), 8, II, Segregation Group: 1 (Acids)|
|Declaration (transport by air) IATA-DGR||UN 3264 CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.(COBALT NITRATE AND CONT. NITRIC ACID), 8, II|