KGW3A02TT3
Polysep™ II 1.0/0.2 µm nominal, Opticap® XL Capsule
inlet connection diam. 1-1/2 in., Opticap® XL 2, pore size 1.0/0.2 μm, cartridge nominal length 2 in. (5 cm)
Synonym(s):
Opticap XL2 Polysep II 1.0/0.2 μm 1-1/2 in. TC/TC, Opticap XL 2 CapsuleMedia: Polysep II 1.0 / 0.2 µm Nominal
Select a Size
About This Item
Product Name
Polysep™ II 1.0/0.2 µm nominal, Opticap® XL Capsule, inlet connection diam. 1-1/2 in., Opticap® XL 2, Chemistry: Mixed Cellulose Esters (MCE)Inlet: 1-1/2 in. Sanitary FlangeOutlet: 1-1/2 in. Sanitary FlangeMax Operating Pressure 80 psi @ 25 °C, pore size 1.0/0.2 μm, cartridge nominal length 2 in. (5 cm)
material
borosilicate glass fiber (BGF) membrane, mixed cellulose esters (MCE) membrane, polypropylene , polypropylene housing, polypropylene support, polypropylene vent cap, silicone seal
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
Quality Level
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
Opticap® XL 2
feature
hydrophilic
manufacturer/tradename
Opticap®
parameter
1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C, 25 °C max. inlet temp., 3.5 bar max. differential pressure (50 psid) at 25 °C, 5.5 bar max. inlet pressure (80 psi) at 23 °C, 80 psig max. inlet pressure
technique(s)
prefiltration: suitable
L
14.2 cm (5.6 in.)
W
3.3 in.
cartridge nominal length
2 in. (5 cm)
diam.
14.5 cm (5.7 in.)
filtration area
0.06 m2
inlet connection diam.
1-1/2 in.
inlet to outlet W
14.2 cm (5.6 in.)
outlet connection diam.
1-1/2 in.
impurities
≤0.5 EU/mL (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤45 mg/capsule
matrix
Polysep™ II
pore size
1.0/0.2 μm nominal pore size, 1.0/0.2 μm pore size
fitting
inlet sanitary flange, outlet sanitary flange, (38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
Features and Benefits
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
- Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Storage Class
4.1B - Flammable solid hazardous materials
wgk
WGK 2
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Global Trade Item Number
| SKU | GTIN |
|---|---|
| KGW3A02TT3 | 04053252571572 |
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service