KPHLG2THH1
Durapore® 0.45 µm, Opticap® XLT Capsule
Opticap® XLT 20, cartridge nominal length 24.6 in. (62.5 cm), filter diam. 4.2 in. (10.7 cm)
Synonym(s):
Durapore® 0.45 µm, Opticap® XLT Capsule
Product Name
Opticap® XLT 20 CapsuleMedia: Durapore® 0.45 µm, Opticap® XLT 20, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF)Inlet: 5/8 in. Hose BarbOutlet: 5/8 in. Hose BarbT-lineMax Operating Pressure: 80 psi @ 25 °C, cartridge nominal length 24.6 in. (62.5 cm), filter diam. 4.2 in. (10.7 cm)
material
polyester support, polyethylene support, polypropylene filter, polypropylene housing, silicone seal
reg. compliance
FDA 21CFR177-182 (all component materials)
Quality Level
sterility
non-sterile
sterilization compatibility
gamma compatible
product line
Opticap® XLT 20
feature
hydrophilic
manufacturer/tradename
Opticap®
parameter
≤30.0 mL/min air diffusion at 3.9 bar (56 psig) and 23 °C (in water), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 4-40 °C (Reverse:), 2.8 bar max. inlet pressure (40 psi) at 60 °C, 25 °C max. inlet temp., 4.1 bar max. differential pressure (60 psid) at 25 °C (Forward:), 5.5 bar max. inlet pressure (80 psi) at 23 °C, 80 psig max. inlet pressure
technique(s)
bioburden reduction: suitable
W
7.8 in.
cartridge nominal length
24.6 in. (62.5 cm)
device L
62.5 cm (24.6 in.)
device size
20 in.
filter diam.
4.2 in. (10.7 cm)
filtration area
0.93 m2
inlet connection diam.
5/8 in.
inlet to outlet width
62.5 cm (24.6 in.)
outlet connection diam.
5/8 in.
impurities
≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction), <0.25 EU/mL bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
0.45 μm pore size
bubble point
≥1930 mbar (28 psig), air with water at 23 °C
fitting
1/4 in. fitting (vent/drain hose barb with double O-ring seal), (16 mm (5?8 in.) Hose Barb Inlet and Outlet)
Looking for similar products? Visit Product Comparison Guide
General description
Preparation Note
Gamma compatible to 40 kGy. 3 autoclave cycles of 60min at 3°C; not in-line steam sterilizable
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation section of Opticap® XL Capsules and Opticap® XLT Capsules user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Global Trade Item Number
| SKU | GTIN |
|---|---|
| KPHLG2THH1 | 04055977275711 |
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service