Skip to Content
Merck
  • Isolation, LC-MS/MS and 2D-NMR characterization of alkaline degradants of tenofovir disoproxil fumarate.

Isolation, LC-MS/MS and 2D-NMR characterization of alkaline degradants of tenofovir disoproxil fumarate.

Journal of pharmaceutical and biomedical analysis (2015-01-17)
Vaibhav Anandgaonkar, Abhishek Gupta, Srinivas Kona, M V N Kumar Talluri
ABSTRACT

The present work describes the preparative isolation and characterization of two alkaline degradation products of tenofovir disoproxil fumarate (TDF). Tenofovir disoproxil is a prodrug of tenofovir (antiviral agent) and co-crystal form of this prodrug with fumaric acid is tenofovir disoproxil fumarate. The drug is subjected to alkaline degradation with 0.1N sodium hydroxide for 2 min at room temperature. The two degradants were detected by high performance liquid chromatography (HPLC) at relative retention of 0.26 and 0.73 with respect to the drug. HPLC method involves gradient elution on Kromasil Eternity column (150 mm × 2.1 mm, 2.5 μm) using ammonium acetate (10mM) - acetonitrile as mobile phase at flow rate of 0.3 mL/min and UV detection at 260 nm. Two degradation products were isolated by preparative HPLC and further characterized by LC-MS, (1)H NMR, (13)C NMR and 2D-NMR. On the basis of this spectral data, the structure of two DPs are confirmed as methyl hydrogen ({[1-(6-amino-9H-purin-9-yl)propan-2-yl]oxy}methyl)phosphonate for DP-I and dimethyl ({[1-(6-amino-9H-purin-9-yl)propan-2-yl]oxy}methyl)phosphonate for DP-II.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Supelco
Sodium hydroxide solution, 49-51% in water, eluent for IC
Sigma-Aldrich
Chloroform, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Supelco
Chloroform, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, powder
Sigma-Aldrich
Hydrogen chloride solution, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Hydrochloric acid solution, 32 wt. % in H2O, FCC
Supelco
Hydrogen chloride – 2-propanol solution, ~1.25 M HCl (T), derivatization grade (GC derivatization), LiChropur
Sigma-Aldrich
Hydrogen chloride solution, 1.0 M in diethyl ether
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, Molecular Biology
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Hydrogen chloride solution, 4.0 M in dioxane
Sigma-Aldrich
Sodium hydroxide, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Sodium hydroxide solution, purum, ≥32%
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Chloroform, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Hydrochloric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Hydrochloric acid, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Sodium hydroxide, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Sodium hydroxide, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Chloroform, suitable for HPLC, ≥99.8%, amylene stabilized
Sigma-Aldrich
Chloroform, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer