Skip to Content
Merck

Mobius® Single-use Assemblies for biopharma manufacturing

Operator connecting tubing to a 3D bin single-use assembly

Across biopharma production, you need reliable single-use assemblies and fluid management solutions that keep every unit operation running. Complex designs, supply constraints, documentation requirements, quality and contamination risks can add cost and operational burden.

Mobius® Single-Use Assemblies combine bags, tubing, connectors, and manifolds into standard or custom fluid management solutions, from media and buffer preparation through sterile filtration and final fill – including fluid transfer, storage, transport, and freezing.

With standard, configurable and custom single-use assemblies, multiple certification options, and comprehensive documentation, we provide the flexibility you need while helping accelerate qualification and reduce process risk.

Need support designing a custom single-use assembly for your process? Complete the webform.

Key benefits and features

Benefit from a wide range of single-use assemblies, supported by comprehensive documentation to support your risk assessment.

Multiple choices are available for your single-use assemblies
Flexible configurations

Choose from a full spectrum of standard and custom single-use solutions, at varying levels of certification, and sterilization options.

Ultimus® Film is composed of six layers for strength and leak prevention
Robustness

Benefit from chemically resistant films with low extractables profile, and superior strength.

Two operators taking notes next to a bioprocessing system
End-to-end support

Get the support you need from assembly design, implementation, qualification, to validation.  

Single-use assemblies across the bioprocess

From upstream cell culture through downstream processing, formulation, and fill-finish, Mobius® Single-Use Assemblies Depending on your application needs, assemblies are available in pre-sterilized, irradiated configurations and meet varying USP requirements.

A Mobius® High Cell Density Cryopreservation Assembly configured with 5 cryobags and a waste bag
Two Mobius® Standard 2D Single-Use assemblies with 2 and 3 ports
Mobius® Standard 3D drum Assembly with two ports
Mobius® Standard 3D Bin Assemblies in a collapsible bin

Cells cryopreservation

Mobius® High Cell Density Cryopreservation Assembly 

View products

Lower volume storage, buffer and media preparation, and intermediates

Mobius® Standard 2D Assemblies

View products

Larger volume transport and storage

Mobius® Standard 3D Drum Assemblies

View products

Larger volume transport and storage

Mobius® Standard 3D Bin Assemblies

View products

A single-use tubing assembly with a sterile filter and several small connectors

Tube-sets and connectors

Connectors, tubing assemblies

View products

Mobius® 2D Freeze Assemblies with shells

Frozen liquid transportation and storage

Mobius® 2D Freeze Assemblies

View products

Mobius® Final Fill Assembly with bags and connectors

Final fill

Mobius® Final Fill Assemblies

View products

Need something tailored for your process? Our MSAT team can help you design and optimize custom assemblies. For critical final fill assemblies, our specialists can help simplify fluid pathways, optimize connections, reduce complexity, minimize manual intervention, and mitigate contamination risk, to support the principles of
EU GMP Annex 1.

 

Flexible options for your Mobius® Assemblies

Mobius® Assemblies offer a range of options to meet your specific manufacturing requirements, with different sizes, materials of construction, sterilization options and levels of certification for different applications.

Single-use assemblies with filtration built into the flow path

Your single-use assembly should function as one integrated system with tubing, connectors, bags, and filters forming a seamless flow path for cell culture media, buffers, sterile filtration and final sterile filtration. With our filtration and biopharmaceutical experience, our team can help you select, implement and validate a single-use assembly tailored to your process, supporting a streamlined path to regulatory readiness.

Single-use films for reliable fluid handling

Our single-use assemblies are designed for safe, reliable performance in any bioprocessing applications and are made with either Ultimus® or Pureflex™ films. Both films share similar fluid-contact layer, simplifying qualification and implementation.

Single-use assembly certification and integrity testing

Mobius® Assemblies offer different certification levels based on components’ qualification, the level of leak testing performed during manufacturing, and the testing performed on the assembly lot after manufacturing. These levels also determine shelf life and sterility claims.

Mobius® Single-use Assemblies can undergo a validated Helium Integrity Manufacturing Release Test, detecting defects across the entire assembly, reducing leaks and the risk of microbial ingress during manufacturing.

Flexible supply options for single-use assemblies

Mobius® MyWay Single-use Assemblies gives you the flexibility of ordering standard and configurable “fit for purpose” assemblies while still receiving the benefits of documentation support and extractable data at reduced lead times.

  • Mobius® Stock: Off-the-shelf standard assemblies 
  • Mobius® Select: Configure-to-order assemblies, using a library of prequalified components 
  • Mobius® Choice: Highly customized solutions

Qualification, validation, and manufacturing support

Designing pharmaceutical manufacturing processes involves more than selecting individual products. It requires deep technical expertise, proven technologies, and a partner who understands the complexities of your process, including critical applications such as sterile drug manufacturing.

Accelerating Compliance

The Emprove® program provides you with comprehensive documentation including the supply, technical, and regulatory information you need to facilitate your risk assessment and regulatory compliance. The Advanced Qualification Dossier consolidates your single-use assembly component information into one comprehensive document. Find out how

Process Development and Manufacturing Support

Partner with our process development scientists and MSAT team at the M Lab™ Collaboration Center to design, implement and qualify your single-use assemblies. Whether in person or a virtual visit, they can help develop, test or troubleshoot without disrupting your manufacturing schedule.  Explore

Single-Use and Filter Validation Services

Validation Services replicate your process conditions through lab-based testing to support safe drug production. We deliver tests, certificates, and expert guidance to ensure confidence at every stage. Access our services

Regional Manufacturing for Supply Resilience

By expanding existing and building new manufacturing sites in regions-for-regions, we’re providing critical supply redundancy. We’re going a step further, reducing risks in our raw material supply chains. Learn more 

 

Frequently asked questions 

Single-use assemblies are configurable fluid management solutions that combine components such as bags, tubing, connectors, and manifolds to support biopharmaceutical processing. They can help manage the storage, handling, transfer, and transport of intermediates and final products. 

Mobius® Single-Use Assemblies include 2D single-use assemblies, 2D freeze assemblies, high-cell-density cryopreservation assemblies, 3D drum assemblies, 3D bin assemblies, tubing assemblies, and final fill assemblies. They support all applications across the bioprocessing workflow, including media and buffer preparation, fluid storage and transport, cell culture and downstream processing, sterile filtration, formulation, final fill and finish, frozen liquid transportation and storage, and cell cryopreservation.

Yes. Our MSAT team supports the design and optimization of assemblies for specific manufacturing requirements, including critical applications such as final fill. Custom designs can help simplify fluid pathways, reduce process complexity and manual interventions, and support contamination risk mitigation. 

Standard assemblies are made to stock and are sterilized, helping drug manufacturers reduce setup time, simplify implementation, improve consistency across manufacturing campaigns, and support technology transfer between facilities.

Depending on the assembly configuration and application, options include pre-sterilized, or gamma irradiated. Available options may vary by product family, materials of construction, and certification requirements. 

Certification levels are based on factors such as component qualification, leak testing performed during manufacturing, and testing conducted on the assembly lot after manufacturing. These levels also determine applicable shelf-life and sterility claims.

Where applicable, Mobius® Single-Use Assemblies can undergo a validated Helium Integrity Manufacturing Release Test. The test can detect defects across the assembly, including tubing and connections, helping reduce the risk of leaks and microbial ingress. 

The Emprove® program provides supply, technical, and regulatory information to support risk assessment and regulatory compliance. The Advanced Qualification Dossier consolidates single-use assembly component information into one comprehensive document. 

Yes. Single-use and filter validation services can replicate process conditions through lab-based testing. These services provide testing, certificates, and technical guidance to support confidence throughout drug manufacturing. 

Our specialists can help identify a suitable standard, configurable, or custom assembly based on your process requirements, including application, fluid pathway, assembly size, materials of construction, sterilization mode, extractables, and integrity testing needs. To discuss your requirements, complete the design support webform. Contact them