Millipore Sigma Vibrant Logo

Unità filtranti Steritop™

Le unità filtranti da bottiglia Steritop offrono una elevata superficie filtrante che consente di operare rapidamente la filtrazione sterilizzante di fluidi acquos.

Le unità filtranti da bottiglia Steritop offrono una elevata superficie filtrante che consente di operare rapidamente la filtrazione sterilizzante di fluidi acquosi, raccogliendo il filtrato in bottiglie dall'imboccatura stretta (33 mm) o larga (45 mm). All’interno dell'imbuto filtrante, una linguetta consente di agganciare un prefiltro opzionale, mantenendolo in sede durante la filtrazione. Ad ulteriore protezione dalle contaminazioni accidentali nel caso l’imbuto tocchi accidentalmente la superficie di lavoro, la filettatura per la connessione con la bottiglia di raccolta è leggermente arretrata.

Panoramica

Specifiche tecniche

Informazioni per l’ordine

Unità con membrana Millipore Express PLUS (PES) da 0,22 µm ad alto flusso e basso adsorbimento proteico, per la filtrazione sterilizzante di soluzioni acquose*Azzera le impostazioni per l'ordine ed i filtri Show Filter
Numero di catalogoDescrizioneCapacità dell’imbutoRaccordo in uscitaQ.tà/ conf.
SCGPS01REFiltri Steritop-GP da 0,22 µm, polietersulfone, 150 mL, 33 mm, sterilizzati a raggi gamma 150 mL Filettatura da 33 mm 12 Prezzi e disponibilità
SCGPS02REFiltri Steritop-GP da 0,22 µm, polietersulfone, 250 mL, 33 mm, sterilizzati a raggi gamma 250 mL Filettatura da 33 mm 12 Prezzi e disponibilità
SCGPS05REFiltri Steritop-GP da 0,22 µm, polietersulfone, 500 mL, 33 mm, sterilizzati a raggi gamma 500 mL Filettatura da 33 mm 12 Prezzi e disponibilità

* Questi prodotti sono stati testati e validati per scopi di ricerca sulle cellule staminali. Per determinarne gli effetti sull'accrescimento o la differenziazione delle cellule staminali murine, sono stati utilizzati tre lotti di unità Steritop-GP per la filtrazione di terreni contenenti LIF. Una volta filtrati, questi terreni sono stati utilizzati per cinque passaggi delle cellule staminali murine, allo scopo di verificare che la filtrazione con le unità Steritop-GP non interferisse con la loro pluripotenza.

Torna su

Documentation

FAQ

DomandaRisposta
Are Stericup and Steritop units autoclavable?No. The highest temperature that the product can be used at is 50C ( 122F ).
Can I bubble point my Stericup/top?No. The unit is not designed to handle the pressures required to perform a bubble point test. It is designed to be run under vacuum only (15 psi max). Bubble points for any of the membranes in the Stericups/tops need to be run at pressures ranging from 22 psi to 57psi.
Do you have a filter for 100% serum?Yes, you can filter serum with Millipore Express membrane. The Express membrane was designed for this application and offers fast filtration time. Millipore Express is available in a large number of filter devices including Millex syringe filters, Stericup and Steritop vacuum devices, Sterivac for large volumes of media and Steriflip for 50 mls.
For tissue culture media filtration which membrane should I use?The best membrane for this application is the Millipore Express membrane. It was designed specifically to filter tissue culture media with serum. It is low protein binding, has fast flow and high throughput (which is also called filter capacity).
I want to sterilize 100% ethanol. Are any of the Stericups or Steritops compatible with ethanol?The funnel and receiver flask is made of polystyrene. Any molded polystyrene will craze in pure ethanol and could structurally fail depending on the forces being applied to it. The funnel could handle the short exposure time but the receiver would craze eventually. Therefore we would not recommend the Stericup with 100% ethanol. The Steritop, if you keep the exposure time to the funnel minimal, should be fine. As you dilute the alcohol the compatibility improves.

Both Express and Durapore membranes are compatible. MCE is not.
I will be filtering tissue culture media with your Stericup/top and am concerned that wetting agents in the filter could effect my cells. Which membrane type would you recommend to avoid this?All of Millipore's Tissue Culture Media filtration sterilization devices contain membranes that are wetting agent (surfactant ) free.
Is the Express membrane surfactant free?Yes, the Express membrane is surfactant free. It also has a very low extractables specification - less then 1.5% by weight.
When I use my Stericup/top, sometimes some of my sterilized solution gets pulled into my vacuum line. How can I eliminate this from happening?Attach your vacuum tubing and turn the vacuum on before adding the liquid to the Stericup/top. This eliminates any initial solution that flowed through the membrane before starting the vacuum from being pulled into the vacuum line.
What is the diameter of the membrane in the Stericup and Steritop units?All of the cups and tops currently have a 70mm diameter membrane, which has 43 cm2 of surface area.
Why use a vacuum driven filter rather than a pressure driven filter?Unlike positive pressure filtration, vacuum driven filtration requires only a vacuum source. It does not require pressure vessels or peristaltic tubing pumps. Stericup and Steritop units are pre-sterilized and disposable making setup and cleanup easy!