Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

APFB03700 Glass Fiber Filter without binder

1.0 µm pore size, hydrophilic glass fiber, 37 mm diameter

Glass Fiber Filter without binder MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
APFB03700
100 pack, APFB, 37 mm  
Purchase on Sigma-Aldrich

Overview

Replacement Information
Description
Catalogue NumberAPFB03700
DescriptionGlass Fiber Filter without binder
Background InformationOverview
Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).

Glass Fiber Filters with Binder Resin:
Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

Type AP15
•Lowest dirt-holding capacity
•Recommended prefilter for 0.2 to 0.6 µm filters

Type AP20
•Lower retention, higher dirt-holding capacity than AP15 filters
•Recommended prefilter for 0.8 to 8.0 µm filters
•Use upstream to protect type AP15 filters

Type AP25
•Added thickness yields same retention and greater dirt-holding capacity as AP20
•Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
•Use upstream to protect type AP15 filters

Glass Fiber Filters without Binder Resin:
The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Type APFA
•Retains fine particles with good efficiency, even at high flow rates
•Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
•Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

Type APFB
•Higher mechanical strength when wet and greater loading capacity than type APFA filters
•Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

Type APFC
•Greater retention, especially for fine particulate and microorganism removal than type APFA filters
•Use for determining total suspended solids in drinking water
•Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

Type APFD
•Thick filter with high flow and low retention
•Use for clarifying suspensions containing particulates greater than 1.0 µm

Type APFF
•Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
•Recommended for USEPA method 1311 for TCLP analysis

Type AP40
•Recommended for Standard Methods Total Suspended Solids 2540D
•Recommended for USEPA method 1311 for TCLP analysis
•Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
•Recommended for determining volatile suspended matter in wastewater and industrial effluents
References
Product Information
HS Code8421 99 99
Filter CodeAPFB
Filter ColorWhite
Maximum Operating Temperature500 °C
Filter TypeDepth filter
Applications
Application1.0 µm pore size, hydrophilic glass fiber, 37 mm diameter
Contaminant of Interest
  • 2,4,5-T, 2,4-D
  • Carbaryl
  • Pyrethrum
  • EPN
  • Malathion
  • Parathion
  • Chlorinated terphynl (60% chlorine)
  • Chrlorinated Triphenyl
  • Polychloroterphynl
  • PCT
  • Aroclor 5460
  • Strychnine, Strychnidin-10-one
  • Oil Mist of White Mineral Oil
  • Water-Insoluble Petroleum-based Cutting Oils
  • Cable Oil
  • Cutting Oil
  • Drawing Oil
  • Engine Oil
  • Heat-Treating Oils
  • Hydraulic Oils
  • Machine Oil
  • Transformer Oil
  • Ribavirin, Virazole, ICN 1229
  • Aldrin (Octalene, Aldrite, Aldrosol, HHDN)
  • Organotin Compounds (as Sn)
  • Paraquat or methyl viologen (CAS # 1910-42-51)
  • Paraquat bis(methyl sulphate) (CAS # 2074-50-2)
  • Thiram, Disulphide
Regulated Test Method Number
  • NIOSH 5002
  • NIOSH 5007
  • NIOSH 5009
  • NIOSH 5013
  • NIOSH 5017
  • NIOSH 5027
  • NIOSH 5504
  • NIOSH 5015
  • NIOSH 5028
  • OSHA ID 161
  • NIOSH 3501
Biological Information
WettabilityHydrophilic
Physicochemical Information
Pore Size1.0 µm
Water Flow Rate
  • 2.2 mL/min x cm²
Dimensions
Filter SurfacePlain
Thickness700 µm
Filter Diameter (⌀)37 mm
Materials Information
Chemistry
  • Glass Fiber
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Packaging Information
Material Size100 pack, APFB, 37 mm
Transport Information
Supplemental Information
Specifications
Global Trade Item Number
Catalogue Number GTIN
APFB03700 04053252675942