Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

113134 盐酸

c(HCl) = 3.571 mol/l (1/0.28 N) Titripur®

盐酸 MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.

同义词: Hydrogen chloride solution

CAS号: 7647-01-0
113134
Purchase on Sigma-Aldrich

概述

Replacement Information

重要规格表

CAS #
7647-01-0

Products

产品目录编号包装 数量 / 包装
1.13134.9010 聚乙烯/铝膜 包装的 Titripac 10 l
描述
产品目录编号113134
同义词Hydrogen chloride solution
参考
产品信息
CAS号7647-01-0
HS代码2806 10 20
Quality LevelMQ200
应用
生物信息
理化信息
密度1.06 g/cm3 (20 °C)
pH值<1 (H₂O, 20 °C)
尺寸
材料信息
毒性学信息
GHS安全信息
危害性图示 危害性图示
危害性图示
危害性声明H290: 可能腐蚀金属。
H315: 造成皮肤刺激。
H319: 造成严重眼刺激。
H335: 可能造成呼吸道刺激。
注意事项声明P234: 只能在原容器中存放。
P261: 避免吸入粉尘/烟/气体/烟雾/蒸气/喷雾。
P264: 作业后彻底清洗皮肤。
P271: 只能在室外或通风良好之处使用。
P302 + P352: 如皮肤沾染：用水充分清洗。
P305 + P351 + P338: 如进入眼睛：用水小心冲洗几分钟。如戴隐形眼镜并可方便地取出，取出隐形眼镜。继续冲洗。
提示语警告
储存类别10 - 13 其它液体及固体
WGKWGK 1 轻度的水危害
一次性12
无机酸及酸酐应在冰水中小心地搅拌 稀释或水合,接着以氢氧化钠(编号:105587)中和(使用手套, 通风橱). 在归入第 D类之前,以广用试纸(编号:109535)测定 pH值. 发烟硫酸必须在搅拌中一次一滴的小心加入40%的 硫酸之中(编号:109286). 手持大量冰块以冷却. 当冷却足 够之后, 以上述方法处理高浓度的硫酸. 酸性蒸气(溴化 氢, 氯化氢, 碘化氢, 氯气, 光气, 二氧化硫)应通入稀氢 氧化钠溶液并以上述处理无机酸的方式处理.
安全信息
危险种类????
产品使用声明
储存和货运信息
储存于 +2°C 到 +30°C储存.
包装信息
运输信息
申报（铁路和陆路）ADR、RIDUN 1789 , 8, II
申报（空运）IATA-DGRUN 1789 , 8, II
申报（海运）IMDG-代码UN 1789 , 8, II, Segregation Group: 1 (Acids)
补充信息
规格
Formliquid
Amount-of-substance concentration3.553 - 3.589 mol/l
Measurement uncertainty+/- 0.011
TraceabilityNIST SRM
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 723 Tris(hydroxymethyl)aminomethane) by means of volumetric standard Tris(hydroxymethyl)aminomethane (article number 1.02408), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Global Trade Item Number
产品目录编号 GTIN
1.13134.9010 04022536147291