Saltar al contenido
Merck

Isolation, LC-MS/MS and 2D-NMR characterization of alkaline degradants of tenofovir disoproxil fumarate.

Journal of pharmaceutical and biomedical analysis (2015-01-17)
Vaibhav Anandgaonkar, Abhishek Gupta, Srinivas Kona, M V N Kumar Talluri
RESUMEN

The present work describes the preparative isolation and characterization of two alkaline degradation products of tenofovir disoproxil fumarate (TDF). Tenofovir disoproxil is a prodrug of tenofovir (antiviral agent) and co-crystal form of this prodrug with fumaric acid is tenofovir disoproxil fumarate. The drug is subjected to alkaline degradation with 0.1N sodium hydroxide for 2 min at room temperature. The two degradants were detected by high performance liquid chromatography (HPLC) at relative retention of 0.26 and 0.73 with respect to the drug. HPLC method involves gradient elution on Kromasil Eternity column (150 mm × 2.1 mm, 2.5 μm) using ammonium acetate (10mM) - acetonitrile as mobile phase at flow rate of 0.3 mL/min and UV detection at 260 nm. Two degradation products were isolated by preparative HPLC and further characterized by LC-MS, (1)H NMR, (13)C NMR and 2D-NMR. On the basis of this spectral data, the structure of two DPs are confirmed as methyl hydrogen ({[1-(6-amino-9H-purin-9-yl)propan-2-yl]oxy}methyl)phosphonate for DP-I and dimethyl ({[1-(6-amino-9H-purin-9-yl)propan-2-yl]oxy}methyl)phosphonate for DP-II.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Dimetilsulfóxido, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Dimetilsulfóxido, ACS reagent, ≥99.9%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Ácido clorhídrico, ACS reagent, 37%
Sigma-Aldrich
Dimetilsulfóxido, Molecular Biology
Sigma-Aldrich
Dimetilsulfóxido, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Dimetilsulfóxido, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Sigma-Aldrich
Hidróxido de sodio, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Hidróxido de sodio, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Dimetilsulfóxido, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Dimetilsulfóxido, anhydrous, ≥99.9%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Hidróxido de sodio solution, 50% in H2O
Sigma-Aldrich
Ácido clorhídrico, ACS reagent, 37%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloruro de hidrógeno solution, 4.0 M in dioxane
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Dimetilsulfóxido, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
Metanol, anhydrous, 99.8%
Sigma-Aldrich
Hidróxido de sodio solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Dimetilsulfóxido, puriss. p.a., ACS reagent, ≥99.9% (GC)
Sigma-Aldrich
Hidróxido de sodio solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Ácido clorhídrico solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hidróxido de sodio, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hidróxido de sodio, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%