Cápsulas OptiScale para aplicaciones esterilizantes
OptiScale® capsules, with a large variety of filtration media options, are a family of convenient, disposable filters ideal for media selection, process screening and scaling.
Less<<
Productos recomendados
Descripción
Especificaciones
Información para pedidos
Documentation
Preguntas frecuentes
| Pregunta | Respuesta |
|---|---|
| What is the compatibility of Durapore with high pH solutions? | The upper recommended pH limit for Durapore membranes is 10. At pH >10, the hydrophilization layer of the membrane may become subject to hydrolysis. The extent of hydrolysis is a function of time, temperature , concentration and time of exposure. Upon exposure to high pH, the hydrophylization layer can swell which could result in a loss of permeability or flux. The hydrolysis of the hydrophilic layer will also lead to increased extractables from the membrane. |
| What are Millipore's general recommendations for filtering high pH solutions? | For applications involving pH > 10, Millipore recommends the use or our PES membranes Express SHF or Express SHC. For information on these filters : Express SHF: http://www.millipore.com/catalogue.nsf/docs/C8873 Express SHC: http://www.millipore.com/catalogue.nsf/docs/C9146 |
| How can I differentiate filter plugging due to air bubbles, particulates, surface tension, inappropriate filter size, etc.? | Air locking will occur when filtration is initiated without adequate venting or when air bubbles become trapped in fluid lines. Air will pass easily through a dry hydrophillic or hydrophobic filter. However, when a filter is wet and air is applied to a surface, the air will remain until it is manually moved upstream by venting or until the bubble point of the filter is reached. Bubble point is defined as the pressure at which gas displaces liquid for the largest set of filter pores and is able to flow through the pores. Air locking reduces the effective filtration area of the filter and thus reduces the flow rate. Surface tension refers to the strong cohesive forces present between molecules at the surface of a liquid. The higher the surface tension, the more force is required to force fluid through the membrane.. Innapropriate filter size will can cause a filter to plug prematurely. Filter pore size is chosen based on the application. If the application requires a sterile fluid, than a 0.22 micron membrane would be used for standard solutions that have bacterial bioburden. A 0.1 micron filter would be used for applications where mycoplasma is a concern. Where virus contamination is a concern, ultrafiltration would be required. The selection of a filter pore size that is smaller than that required for the application will cause a decrease in filter capacity and an increase in cost. |
Productos y aplicaciones relacionados
Familias de productos
Cápsulas desechables estériles Opticap con membrana Durapore hidrófilaSterile Opticap capsule filters are fully contained capsule filters with Durapore 0.22 µm or 0.1 µm hydrophilic PVDF membrane.Más información >> |
Cartuchos filtrantes Durapore Multimedia de grado esterilizanteProviding sterility assurance, high flow rates and extended throughputs, low extractables, and broad chemical compatibility.Más información >> |
Millipore Express® SHC 0.5/0.2 μm Cartridge FiltersHigh capacity, sterilizing-grade PES filtersMás información >> |
|
Millipore Express® SHC 0.5/0.2 μm Capsule FiltersMillipore Express® SHC (Sterilizing-grade High Capacity) devices offer high performance and superior economics in a wide variety of sterilizing-grade filtration applications.Más información >> |
Cartuchos Optiseal con membrana hidrófila Durapore de 0,1 µm y 0,22 µmOptiseal cartridge filters feature a revolutionary cartridge-to-housing sealing mechanism and pleated configuration, resulting in maximum sterility assurance and economical performance.Más información >> |
|
Cápsulas OptiScale para aplicaciones de clarificación y prefiltraciónThese “drop-in” filter devices, with a variety of media options, create an effective platform for rapidly evaluating biopharmaceuticals.Más información >> |
|
Millipore Express® SHF 0.2 μm Capsule FiltersOpticap® XL and XLT capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings.Más información >> |
Cápsulas desechables Opticap XL y XLT con membrana Durapore hidrófila de 0,1 µm y 0,22 µmSterilizing-grade 0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes are low protein binding and provide sterility assurance, high flow rates and throughputs.Más información >> |
|
Millipore Express® SHF Cartridge FiltersHigh flow sterilizing-grade PES filters for validated process stepsMás información >> |
|
Multilayer Durapore® 0.45/0.22 µm Cartridge FiltersSterilizing grade, hydrophilic Multilayer Durapore 0.45/0.22 µm filters maximize process efficiency by providing high product recovery and extended throughput with low pressure drops.Más información >> |
|
Cápsulas desechables Opticap XL con Durapore MultimediaProviding sterility assurance, high flow rates and extended throughputs, low extractables, and broad chemical compatibility.Más información >> |
|
Cápsulas desechables Opticap XL y XLT con membrana Durapore Multicapa de 0,45/0,22 µmOpticap XL and XLT capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings.Más información >> |
Productos relacionados por: Application Facete
| Antibody Purification |
| Dialysis and Filtration |
Productos relacionados por: Brand Facete
| Optiscale™ |
Categorías
| Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Liquid > Durapore |