HPF Millex® Filters
Sample volume: >10mL Features: Integrated prefilter yielding 2-4X greater throughput than traditional syringe filters.
for High Particulate Filtration
Samplicity® G2 Filtration System
Vacuum filtration of 1-8 samples, through Millex® 33 mm filters, directly into HPLC vials
Hard-to-Filter Samples in Dissolution Testing
Often times dissolution testing samples are viscous and/or contain high levels of particulates. Viscous samples can greatly slow down filtration rate, and high levels of particulates may clog the filter membrane’s pores. For these dissolution testing samples, we recommend using filtration devices optimized for hard-to-filter samples.
High Particle Filtration
25 mm HPF Millex® syringe filters are the right choice for high particulate load samples. HPF Millex® syringe filters include a graduated glass fiber prefilter to remove larger particles and either a 0.20 μm or 0.45 μm membrane filter for fine filtration. This combination of prefilter and membrane provides significantly greater throughput than standard filters without prefiltration media, especially when filtering particle-laden solutions. HPF Millex® syringe filters are available in bulk for individual sample filtration and in tubes for use with automated filter changing systems.
Samplicity® G2 Filtration System for Hard-to-Filter Samples
Manually filtering hard-to-filter HPLC samples can require excessive manual force, greater time per sample, and lower recovery—all reducing laboratory efficiency. In contrast, the vacuum-driven Samplicity® G2 filtration system filters even highly viscous samples in seconds, with minimal manual force.
Millex Samplicity® filters with 0.45 µm PVDF membrane were used to efficiently clarify hard-to-filter pharmaceutical samples.
|Filtration Time, Seconds
|Calamine Diphenylhydramin Lotion
|Milk of Magnesia
|DayQuil Cold and Flu Syrup
1.0 mL samples of 1% Pepto-Bismol were filtered by 15 users, either through hydrophilic polytetrafluoroethylene (PTFE) Millex® syringe filters with a 10 mL syringe, or through 0.45 µm hydrophilic PTFE Millex Samplicity® membrane filters using the Samplicity® filtration system.Pre-launch Device Disclaimer: The information presented is based on preliminary development results. Device performance in specific applications may be different.