It appears that your browser has JavaScript disabled.

This Website requires your browser to be JavaScript enabled.

Please enable JavaScript and reload this page.

APFB04700 Millipore不含黏合剂的玻璃纤维膜，APFB，47 mm

1.0 µm pore size, hydrophilic glass fiber, 47 mm diameter

View Products on Sigmaaldrich.com

Recommended Products

概述

Replacement Information

描述
产品目录编号	APFB04700
描述	不含黏合剂的玻璃纤维膜，APFB，47 mm
背景信息	Overview Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar). Glass Fiber Filters with Binder Resin: Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions. Type AP15 •Lowest dirt-holding capacity •Recommended prefilter for 0.2 to 0.6 µm filters Type AP20 •Lower retention, higher dirt-holding capacity than AP15 filters •Recommended prefilter for 0.8 to 8.0 µm filters •Use upstream to protect type AP15 filters Type AP25 •Added thickness yields same retention and greater dirt-holding capacity as AP20 •Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids •Use upstream to protect type AP15 filters Glass Fiber Filters without Binder Resin: The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases. Type APFA •Retains fine particles with good efficiency, even at high flow rates •Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys) •Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates) Type APFB •Higher mechanical strength when wet and greater loading capacity than type APFA filters •Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting Type APFC •Greater retention, especially for fine particulate and microorganism removal than type APFA filters •Use for determining total suspended solids in drinking water •Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms Type APFD •Thick filter with high flow and low retention •Use for clarifying suspensions containing particulates greater than 1.0 µm Type APFF •Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates •Recommended for USEPA method 1311 for TCLP analysis Type AP40 •Recommended for Standard Methods Total Suspended Solids 2540D •Recommended for USEPA method 1311 for TCLP analysis •Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration •Recommended for determining volatile suspended matter in wastewater and industrial effluents

参考

产品信息
HS代码	7019 80 00
过滤器代码	APFB
过滤器颜色	白色
最高工作温度	500 °C
过滤器类型	深层滤膜

应用
应用	1.0 µm pore size, hydrophilic glass fiber, 47 mm diameter

生物信息
可湿润性	亲水性

理化信息
孔径	1.0 µm
重量分析的提取物（%）	300%
孔隙率%	90%
水流量	2.2 mL/min x cm²

尺寸
过滤器表面	平纹
厚度	700 µm
过滤器直径 (⌀)	47 mm

材料信息
化学	Glass Fiber

毒性学信息

GHS安全信息

安全信息

产品使用声明

储存和货运信息

包装信息
数量	100

运输信息

补充信息

规格

Global Trade Item Number
产品目录编号	GTIN
APFB04700	04053252510991

Documentation

相关产品和应用

产品族

种类

Reagents, Chemicals and Labware > Lab Filtration > Filter Discs and Membranes

最近查看的内容