Millipore Sigma Vibrant Logo

152224 AEC

152224
価格&在庫状況を照会

概要

Replacement Information

主要スペック表

価格&在庫状況

カタログ番号 在庫状況包装 Qty/Pk 価格 数量
152224-10MLCN
在庫状況検索中…
現在国内在庫なし現在国内在庫なし
現在国内在庫有り 
販売中止
在庫僅少
現在国内在庫あり
    Remaining : Will advise
      Remaining : Will advise
      注文対象外
      お問合せください
      Contact Customer Service

      アルミニウムカン 10 ml
      価格を検索中…
      価格が見つかりません
      Minimum Quantity needs to be mulitiple of
      Maximum Quantity is
      弊社照会 詳細を表示 
      値引
      ()
       
      弊社照会
      Description
      OverviewPrecipitable peroxidase substrate for immunoblotting and immunohistochemical staining techniques. Produces a red end product that is soluble in alcohol. When used in immunohistochemistry, aqueous mounting media, and counterstains must be used. Directions included for use in each application.
      Catalogue Number152224
      Brand Family Calbiochem®
      Synonyms3-Amino-9-ethylcarbazole, 3AC
      References
      ReferencesOkano, K., et al. 1992. Rinsho Byori 40, 93.
      Krenacs, T., et al. 1990. Histochem. J. 22, 530.
      Product Information
      CAS number132-32-1
      FormYellowish-brown to reddish solution
      Hill FormulaC₁₄H₁₄N₂
      Chemical formulaC₁₄H₁₄N₂
      PreservativeNone
      Quality LevelMQ100
      Applications
      Key Applications Immunoblotting (Western Blotting)
      Immunohistochemistry
      Application NotesImmunoblotting (see comments)
      Immunohistochemistry (see comments)
      Application CommentsStable at 4°C and 18-26°C. Functionality determined by performing an immunohistologic stain using the final product.

      Suggested procedure for use of AEC in immunohistochemistry and immunoblotting:

      1. Complete all required incubations with antibodies and HRP-labeled probes, and all necessary wash steps.
      2.Prepare 1X AEC Substrate Buffer: Add 9 parts distilled water to 1 part 10X AEC Substrate Buffer, Cat. No. 152226 (0.5 M acetate buffer containing 88 mM H2O2). Mix well. The final pH of this solution will be ~5.0.
      3. Prepare 1X AEC Substrate Solution: Add 1 part 50X AEC Concentrate to 50 parts 1X AEC Substrate Buffer (prepared in Step 2). Mix well.
      4. Following the final wash, completely cover tissue sections with 1X AEC Substrate Solution (prepared in Step 3) and incubate 10-30 min at room temperature. The same conditions apply for immunoblotting. Note: Variables associated with assay conditions will dictate the proper reaction times.
      5. After reaction is complete, wash tissue sections or blotting membranes thoroughly in distilled water.
      6. If tissue sections require a counterstain, Mayer's Hematoxylin followed by blueing in alkaline tap water or a 0.5% aqueous methyl green solution is recommended.
      7. Mount tissue sections in a water-based mounting medium. Air-dry blots and store protected from light.
      Biological Information
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      RTECSFE3590000
      Safety Information
      R PhraseR: 25

      Toxic if swallowed.
      S PhraseS: 45

      In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
      Product Usage Statements
      Storage and Shipping Information
      Ship Code Ambient Temperature Only
      Toxicity Toxic
      Hazardous Materials Attention: Due to the nature of the Hazardous Materials in this shipment, additional shipping charges may be applied to your order. Certain sizes may be exempt from the additional hazardous materials shipping charges. Please contact your local sales office for more information regarding these charges.
      Storage +2°C to +8°C
      Protect from Light Protect from light
      Do not freeze Ok to freeze
      Special InstructionsDiscard if a red or brown precipitate is evident.
      Packaging Information
      Transport Information
      Supplemental Information
      Specifications

      Documentation

      AEC (M)SDS

      タイトル

      英語版製品安全データシート((M)SDS) 

      AEC 試験成績書(CoA)

      タイトルロット番号
      152224

      参考資料

      参考資料の概要
      Okano, K., et al. 1992. Rinsho Byori 40, 93.
      Krenacs, T., et al. 1990. Histochem. J. 22, 530.
      データシート

      Note that this data sheet is not lot-specific and is representative of the current specifications for this product. Please consult the vial label and the certificate of analysis for information on specific lots. Also note that shipping conditions may differ from storage conditions.

      Revision20-November-2008 JSW
      Synonyms3-Amino-9-ethylcarbazole, 3AC
      ApplicationImmunoblotting (see comments)
      Immunohistochemistry (see comments)
      DescriptionPrecipitable peroxidase substrate for immunoblotting and immunohistochemical staining techniques supplied as a 50X concentrate (0.095 mol/l). To be used with AEC Substrate Buffer, Cat. No. 152226
      BackgroundPrecipitable peroxidase substrate for immunoblotting and immunohistochemical staining techniques. In the presence of horseradish peroxidase (HRP) and hydrogen peroxide, AEC is oxidized to a water-insoluble red product. AEC may be used as a substitute for diaminobenzidine (DAB) in HRP-based immunoassays. Although not as sensitive as DAB, the red deposit formed at the sites of AEC oxidation make this substrate useful where double labeling is desired. Since oxidized AEC is soluble in alcohols and xylene, aqueous-based mounting medium and counterstains must be used for immunohistochemical applications.
      FormYellowish-brown to reddish solution
      CAS number132-32-1
      RTECSFE3590000
      Chemical formulaC₁₄H₁₄N₂
      PreservativeNone
      CommentsStable at 4°C and 18-26°C. Functionality determined by performing an immunohistologic stain using the final product.

      Suggested procedure for use of AEC in immunohistochemistry and immunoblotting:

      1. Complete all required incubations with antibodies and HRP-labeled probes, and all necessary wash steps.
      2.Prepare 1X AEC Substrate Buffer: Add 9 parts distilled water to 1 part 10X AEC Substrate Buffer, Cat. No. 152226 (0.5 M acetate buffer containing 88 mM H2O2). Mix well. The final pH of this solution will be ~5.0.
      3. Prepare 1X AEC Substrate Solution: Add 1 part 50X AEC Concentrate to 50 parts 1X AEC Substrate Buffer (prepared in Step 2). Mix well.
      4. Following the final wash, completely cover tissue sections with 1X AEC Substrate Solution (prepared in Step 3) and incubate 10-30 min at room temperature. The same conditions apply for immunoblotting. Note: Variables associated with assay conditions will dictate the proper reaction times.
      5. After reaction is complete, wash tissue sections or blotting membranes thoroughly in distilled water.
      6. If tissue sections require a counterstain, Mayer's Hematoxylin followed by blueing in alkaline tap water or a 0.5% aqueous methyl green solution is recommended.
      7. Mount tissue sections in a water-based mounting medium. Air-dry blots and store protected from light.
      Storage +2°C to +8°C
      Protect from light
      Do Not Freeze Ok to freeze
      Special InstructionsDiscard if a red or brown precipitate is evident.
      Toxicity Toxic
      ReferencesOkano, K., et al. 1992. Rinsho Byori 40, 93.
      Krenacs, T., et al. 1990. Histochem. J. 22, 530.