CDUFBC001
Biopak® C Clinical Cartridge
Removes bacteria and bacterial by-products from water. For use with AFS® and Milli-Q® CLX systems.
조직 및 계약 가격을 보려면 로그인를 클릭합니다.
크기 선택
보기 변경
제품정보 (DICE 배송 시 비용 별도)
UNSPSC Code:
41104212
NACRES:
NA.21
eCl@ss:
33050190
Quality Segment
sterility
0.22 μm filtered
feature
better assay reliability, Reduces the need for frequent analyzer calibration
composition
(polysulfone hollow fibers)
packaging
pkg of 1 unit
manufacturer/tradename
BioPak®
parameter
≥1 bar pressure (3 bar), 0.5 mL/min air diffusion at 2 bar, 1.5 L/min flow rate at 1 bar and 20 °C, 5 °C temp. range (35 °C)
volume
100 L , 100000 mL
total organic carbon (TOC) residue
<500 ppb (after 5 L Rinsing)
pore size
0.22 μm pore size
fitting
1/4 in. inlet connection (Gaz (Straight) Luer Slip F), 8 mm outlet connection (PTFE)
compatibility
for use with AFS®, for use with Milli-Q® CLX
shipped in
ambient
General description
The Biopak® C unit is an easy-to-install, disposable ultrafiltration cartridge that provides a final, in-line purification step for immunoassay and clinical chemistry analyzers.
The cartridge efficiently removes bacteria and bacterial by-products, such as alkaline phosphatase (ALP), from analyzer feed water, which is used to dilute reagents, make blanks, and rinse tubing and probes. This results in a more stable baseline and better assay reliability.
The Biopak® C ultrafiltration cartridge is composed of polysulfone hollow fibers. This membrane optimizes the rejection of bacterial ALP and bacteria while maintaining a high flow rate.
The cartridge efficiently removes bacteria and bacterial by-products, such as alkaline phosphatase (ALP), from analyzer feed water, which is used to dilute reagents, make blanks, and rinse tubing and probes. This results in a more stable baseline and better assay reliability.
The Biopak® C ultrafiltration cartridge is composed of polysulfone hollow fibers. This membrane optimizes the rejection of bacterial ALP and bacteria while maintaining a high flow rate.
Application
When fed with high-quality pure water, the Biopak® C ultrafiltration cartridge efficiently removes bacteria and bacterial by-products such as ALP, to provide optimum-quality water for use in ALP-sensitive immunoassays.
Features and Benefits
- Removes ALP from water (< 1 μUnits/μL).
- Ensures bacteria levels below 10 cfu/mL (typically < 1 cfu/mL).
- Designed to remove endotoxins, and to perform a pyrogen log reduction value superior or equal to 4, for pyrogen feed concentration between 1000 and 10,000 EU/mL, and a nuclease reduction from 1 μg/mL to less than 0.01 ng/mL at 1 bar feed water pressure.
- Supports stable assay baselines, resulting in better assay reliability.
- Reduces the need for frequent analyzer calibration.
- Eliminates the need for frequent analyzer decontamination that results in costly downtime.
- Includes: Self-adhesive label.
Other Notes
Directions for Use
- Organism Retention: Bacteria and pyrogens
- Mode of Action: Ultrafiltration
- Application: Cell culture media, molecular biology
- Intended Use: Bioburden reduction
- Instructions for Use: This item provides water filtered through ultrafiltration hollow fibers. Refer to insert, section "replacement" in the product package.
- Storage Statement: Store in a dry location.
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Polysulfone hollow fibers for ALP and bacteria removal
Legal Information
AFS is a registered trademark of Merck KGaA, Darmstadt, Germany
BIOPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.