1.52021
Chromolith® HighResolution RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 50 mm x 4.6 mm HPLC Column
동의어(들):
Chromolith® HighResolution RP-18 endcapped 50-4.6 HPLC column
크기 선택
제품정보 (DICE 배송 시 비용 별도)
제품 이름
Chromolith® HighResolution RP-18 endcapped, L × I.D. 50 mm x 4.6 mm HPLC column
material
PEEK column
Quality Level
agency
suitable for USP L1
product line
Chromolith®
feature
endcapped
packaging
1 ea of
extent of labeling
15% Carbon loading, 18% Carbon loading
parameter
50 °C max. temp., 200 bar pressure, 45 °C max. temp.
technique(s)
HPLC: suitable, LC/MS: suitable, mass spectrometry (MS): suitable (High)
column L × I.D.
5 cm × 4.6 mm
matrix
highly porous, monolithic silica
matrix active group
C18 bonding phase, octadecylsilane (ODS), C18 bonding phase
pore size
1.15 μm macroporosity, 1.5 μm macroporosity, 15 nm mesoporosity
operating pH range
2-7.5
separation technique
reversed phase
storage temp.
no temp limit
General description
Chromolith® HighResolution RP-18 endcapped columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 Å), the surface modification is octadecylsilane with full end-capping.
Chromolith® HighResolution RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 2.7 to 3 μm particle size fully porous particulate column. Chromolith® HighResolution RP-18 endcapped columns are perfectly suitable for LC-MS applications.
The column dimension of 50 mm length and 4.6 mm I.D. is the best choice for very fast separations on any HPLC System and rapid method devlopment.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® HighResolution RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.52025] with the Chromolith® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column).
[151467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Chromolith® HighResolution RP-18 endcapped columns are also available in 2 mm I.D. column dimension for perfect fit to UHPLC and UHPLC-MS needs.
Flyer: [UHPLC-like performance - Rapid and Robust at Low Pressure - Chromolith® HighResolution RP-18 endcapped 2 mm I.D. HPLC Columns]
Analysis Note
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 135000
Capacity factor (Anthracene): 3.2 - 4.2
Tailing (USP): 0.90 - 1.35 %
Selectivity
separation factor (anthracene/progesterone): 1.90 - 2.35
Legal Information
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
문서
Monolithic silica HPLC columns enable high-throughput analysis at low back pressure without loss of separation efficiency or peak capacity.
국제 무역 품목 번호
| SKU | GTIN |
|---|---|
| 1.52021.0001 | 04027269204839 |