Quality Segment
material
polyethersulfone membrane, polypropylene housing
agency
suitable for DIN 38407-42, suitable for GB 31604.35-2016
sterility
non-sterile
product line
Millex™
feature
holdup volume≤ 15 μL (after air purge), hydrophilic
manufacturer/tradename
Millex™
parameter
10 bar max. inlet pressure (150 psi), 45 °C max. temp.
technique(s)
UHPLC: suitable, analytical sample preparation: suitable, fast flow filtration: suitable, low protein-binding filtration: suitable
H
21 mm
diam.
13 mm
filtration area
0.8 cm2
volume
10 mL
color
green
pore size
0.22 μm
input
sample type mild organic solution(s)
sample type aqueous solution(s)
bubble point
≥4.1 bar, air with water at 23 °C
fitting
female Luer-Lok® inlet, male Luer outlet slip
shipped in
ambient
General description
- Low protein binding to minimize interaction with your sample and maximize recovery
- Polypropylene housing, offering a low level of extractables and broad chemical compatibility
- Membrane type and pore size are printed on the device for easy reference
- A green band identifies non-sterile Millex™ filters with Millipoore Express® PLUS PES membrane
- Recommended for filtering 1-10 milliliter (mL) volumes to remove particles prior to instrumentation analysis
Legal Information
Still not finding the right product?
Explore all of our products under Millex™ polyethersulfone syringe filter
— 또는 —
제품 선택 도구}를 사용하여 선택의 폭을 좁혀보세요.
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
문서
수정된 EPA 537.1을 사용하여 PFAS 테스트를 위한 불소화 추출물, 회수 및 권장 여과 제품에 대한 데이터를 확인하세요.
수정된 EPA 1633을 사용하는 PFAS 검사를 위한 데이터 및 추천 여과 제품.
EPA 방법 537.1을 이용한 물 시료의 PFAS 검사에서 Millex® PES 시린지 필터의 검증.
국제 무역 품목 번호
| SKU | GTIN |
|---|---|
| SLGPX13NK | 04053252398650 |