Viresolve® Pro Solution
Recommended Products
Overview
Specifications
Ordering Information
Documentation
Related Products & Applications
Product Families
Viresolve Prefilter Pod Disposable DevicesAdsorptive prefilters for removing protein aggregatesLearn More >> |
Related Products By: Application Facete
| Protein Purification |
| Dialysis and Filtration |
Related Products By: Brand Facete
| Viresolve® |
Categories
Viresolve® Pro Micro 40 Kit
)
Viresolve® Pro Micro 40 Device Kit
- Small scale devices for process development, optimization and validation studies
- Parvovirus retentive filter: ≥ 4.0 LRV
- Devices 100% tested with air/water diffusion and Binary Gas Test
Viresolve® Pro Micro Shield & Shield H Kits
)
Viresolve® Pro Shield Kit
)
Viresolve® Pro Shield H Kit
- Small scale devices for process development, optimization and validation studies
- Membrane based adsorptive prefilters to remove protein aggregates and other fouling species
- Nine units per kit (one membrane lot)
Viresolve® Pro Modus Shield / Shield H / Device
)
Viresolve® Pro Modus Shield
)
Viresolve® Pro Modus Shield H
)
Viresolve® Pro Modus Device
- Pilot and mid scale manufacturing
- Three different size formats
- Fully self contained (hardware holder not required)
- Fully disposable single-use fluid path
- Devices 100% tested with air/water diffusion and Binary Gas Test
- Shield / Shield H 100% aerosol tested
Viresolve® Pro Magnus Shield / Shield H / Device
)
Viresolve® Pro Magnus Shield
)
Viresolve® Pro Magnus Shield H
)
Viresolve® Pro Magnus Device
- Large scale manufacturing
- Two different size formats
- Integrated gaskets
- Units are stackable in the Viresolve® Pro/Pro+ Magnus Holder (up to 7 units)
- Alignment keys on each unit to minimize errors during installation
- Fully disposable single-use fluid path
- Devices 100% tested with air/water diffusion and Binary Gas Test
- Shield / Shield H 100% aerosol tested
Viresolve® Pro/Pro+ Magnus Holder
)
- Options for using Viresolve® Pro Devices with or without Shield/Shield H prefiltration
- No product contact eliminates the need for cleaning validations
- Simple manual hydraulics to clamp units
- Vertical orientation to minimize footprint and facilitate use (stack, clamp, run)
- Capable of accepting up to 7 units
Viresolve® Pro Fittings Kits
Single-use fittings for use in the Viresolve® Pro/Pro+ Magnus holder
The Emprove® Program
The Emprove® Program complements the product portfolio through
- Comprehensive documentation to support qualification, risk assessment and process optimization needs.
- Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
- Convenient 24/7 access to up-to-date product information.
Viresolve® Pro Shield, Shield H and Device
| Nominal Dimensions | |
| Micro 40 | Height: 4.03 cm (1.51 in.) Diameter: 4.37 cm (1.72 in.) |
| Modus 1.1 | 9.22 cm x 18.62 cm (3.63 in. x 7.33 in.); Height: 5.92 cm (2.33 in.) |
| Modus 1.2 | 9.22 cm x 18.62 cm (3.63 in. x 7.33 in.); Height: 7.85 cm (3.09 in.) |
| Modus 1.3 | 9.22 cm x 18.62 cm (3.63 in. x 7.33 in.); Height: 13.56 cm (5.34 in.) |
| Magnus 2.1 | 20.96 cm x 34.29 cm (8.25 in. x 13.50 in.); Height: 4.42 cm (1.74 in.) |
| Magnus 2.2 | 20.96 cm x 34.29 cm (8.25 in. x 13.50 in.); Height: 9.50 cm (3.74 in.) |
| Magnus holder | 135 x 61 x 56 cm (53 x 24 x 22 in.) |
| Nominal Effective Filtration Area |
|
| Micro 40 | 3.4 cm^2 |
| Modus 1.1 | 0.017 m2 |
| Modus 1.2 | 0.07 m2 |
| Modus 1.3 | 0.22 m2 |
| Magnus 2.1 | 0.51 m2 |
| Magnus 2.2 | 1.53 m2 |
| Materials of Construction | |
| Micro 40 | Membrane – Polyethersulfone (PES) Bottom Endcap/Top Endcap: Polyvinylidene fluoride (PVDF) |
| Modus | Membrane: Polyethersulfone (PES); Gaskets: Silicone; Housing: Polyvinylidene fluoride (PVDF) |
| Magnus | Membrane: Polyethersulfone (PES); Gaskets: Silicone; Housing: Polyvinylidene fluoride (PVDF) |
| Magnus holder | Structural components: 316 L Stainless Steel |
| Disposable Magnus Fittings | Polyvinylidene fluoride (PVDF) Gaskets: Silicone |
| Standard Connections | |
| Micro | Inlet – Female Luer fitting; Outlet – Male Luer fitting |
| Vent – Female Luer fitting | |
| Modus | Inlet/outlet: 3/4" sanitary TC fittings |
| Integrated vent: 1/4" Hose barb with double O-ring seal | |
| Magnus | Disposable 1.5" sanitary TC fittings |
| Vent: disposable 3/4" sanitary TC fitting for the port | |