Skip to Content
Merck

Key Documents

View All Documentation

SVSXA47FF3

Multimedia Durapore® 1.2/0.2/0.22 µm, OptiScale® Capsule

OptiScale® 47, filter filtration area 17.7 cm²

Synonym(s):

Multimedia Durapore® 1.2/0.2/0.22 µm, OptiScale® Capsule

Sign In to View Organizational & Contract Pricing.

Select a Size

Change View

About This Item

UNSPSC Code:
23151806
Technical Service
Need help? Our team of experienced scientists is here for you.
Let Us Assist

Product Name

OptiScale® 47 Capsule Media: Milligard® 1.2 / 0.2 / 0.22 µm Nominal, Max Pressure: 80 psi @ 25 °C

Quality Segment

400

material

PVDF vent cap, fluoroelastomer FKM seal, mixed cellulose esters (MCE) prefilter, polycarbonate device, polypropylene support

reg. compliance

meets FDA 21 CFR 177-182 (all component materials)

sterility

non-sterile

sterilization compatibility

autoclavable compatible

product line

OptiScale® 47

feature

hydrophilic, with prefilter

manufacturer/tradename

OptiScale®

parameter

25 °C max. inlet pressure, 3.5 bar max. differential pressure (50 psid) at 25 °C, 3.5 bar max. inlet pressure (50 psi) at 25 °C, 80 psig max. inlet pressure

technique(s)

sterile filtration: suitable

filter diam.

2.7 in. (6.9 cm)

filter filtration area

17.7 cm2

impurities

≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)

matrix

Multimedia Durapore®

pore size

1.2/0.2/0.22 μm pore size

bubble point

≥3450 mbar (50 psig), air with water

fitting

(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

General description

Cartridge Type: Liquid
Device Configuration: Capsule

Preparation Note

Sterilization Method: 3 autoclave cycles of 60 min at 123 °C

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥ 100 mL

Other Notes

Directions for Use
  • Organism Retention: Bacterial
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
  • Storage Statement: Please refer OPTISCALE®-25 user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Still not finding the right product?

Explore all of our products under OptiScale® 47 Capsule Media: Milligard® 1.2 / 0.2 / 0.22 µm Nominal

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library