제품 이름
Millipak® Final Fill 200 Durapore®, Inlet: 1/2 in. Hose Barb Outlet: 1/2 in. Hose Barb Vent: 1/8 in. Hose Barb
material
PVDF membrane, polysulfone housing, silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
sterilization compatibility
gamma compatible
x-ray compatible
product line
Millipak® Final Fill
feature
hydrophilic
parameter
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
technique(s)
bioburden reduction: suitable
filter diam.
8.1 cm (3.2 in.)
filtration area
1000 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
0.45 μm pore size
bubble point
≥26 psi (1790 mbar), air with water °C
fitting
inlet hose barb (13 mm (1/2 in.)), outlet hose barb (13 mm (1/2 in.))
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Still not finding the right product?
Explore all of our products under Millipak® Final Fill 200 Durapore®
Emprove® 프로그램을 사용하여 GMP 준수 유지
Emprove® Dossiers로 자격을 가속화하고, 규정 준수를 유지하며, 시간을 절약하세요.
주: EmproveSuite.com으로 이동하게 됩니다. 귀하의 사용자 이름과 비밀번호는 시그마알드리치닷컴과는 별개이며 다를 수 있습니다.
무료로 등록하고 몇 분 안에 Emprove® Dossiers에 액세스하세요. 구독 플랜을 업그레이드하여 Emprove® Suite에서 고급 및 맞춤형 콘텐츠를 잠금 해제하세요.
원하는 정보를 찾지 못하셨나요? Emprove® 프로그램 도움말 페이지 방문하기.