Quality Segment
material
polyester support, polyethersulfone membrane, polypropylene housing
product line
Opticap®
parameter
1.4 bar max. pressure (20 psi) at 4-25 °C (reverse), 1.7 bar max. pressure (25 psi) at 80 °C, 4.5 bar max. pressure (65 psi) at 4-25 °C (forward)
technique(s)
prefiltration: suitable
L
22.6 cm (8.9 in.)
diam.
9.1 cm (3.6 in.)
filtration area
0.29 m2 (3.1 ft2)
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Milligard® PES
pore size
1.2/0.8 μm pore size
fitting
inlet/outlet hose barb for 14 mm (9/16 in.)
Application
Gamma irradiation up to 40 kGy and 3 wet autoclave cycles of 60 minutes at 123°C.
Features and Benefits
≥ 2700 mbar (39.2 psi) air with water.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182 based on information provided by raw material suppliers.
Devices tested and meet requirements of USP 788 for large volume parenterals.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182 based on information provided by raw material suppliers.
Devices tested and meet requirements of USP 788 for large volume parenterals.
Packaging
1/pack
Double easy open bag.
Double easy open bag.
Legal Information
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
Disclaimer
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 2014/68/EU of 15 May 2014.
This product has been classified under Article 4 § 3 of the Directive 2014/68/EU. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use.
In compliance with Article 4 § 3 of the Directive 2014/68/EU, this product does not bear the CE mark.
This product has been classified under Article 4 § 3 of the Directive 2014/68/EU. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use.
In compliance with Article 4 § 3 of the Directive 2014/68/EU, this product does not bear the CE mark.
Emprove® 프로그램을 사용하여 GMP 준수 유지
Emprove® Dossiers로 자격을 가속화하고, 규정 준수를 유지하며, 시간을 절약하세요.
Dossiers 다운로드
주: EmproveSuite.com으로 이동하게 됩니다. 귀하의 사용자 이름과 비밀번호는 시그마알드리치닷컴과는 별개이며 다를 수 있습니다.
무료로 등록하고 몇 분 안에 Emprove® Dossiers에 액세스하세요. 구독 플랜을 업그레이드하여 Emprove® Suite에서 고급 및 맞춤형 콘텐츠를 잠금 해제하세요.
원하는 정보를 찾지 못하셨나요? Emprove® 프로그램 도움말 페이지 방문하기.