제품 이름
OptiScale® 47 Capsule Media: Millipore Express® SHF 0.2 µm, Max Pressure: 80 psi @ 25 °C
Quality Segment
material
PVDF vent cap, fluoroelastomer FKM seal, fluoroelastomer O-ring, polyethersulfone membrane, polypropylene housing, polypropylene support
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
OptiScale®
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
5.5 bar max. differential pressure (80 psi) at 25 °C (Forward), 5.5 bar max. inlet pressure (80 psi) at 25 °C, 690 mbar max. differential pressure (10 psi) at 25 °C (Reverse)
technique(s)
sterile filtration: suitable
L
3.70 in. (94 mm)
cartridge nominal length
3.24 in. (82 mm)
diam.
2.75 in. (70 mm)
filtration area
17.7 cm2
inlet connection diam.
3/4 in.
outlet connection diam.
1/4 in.
impurities
<0.25 EU/mL Bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Millipore Express® SHF
pore size
0.2 μm
bubble point
≥4000 mbar (58 psig), air with water at 23 °C
fitting
19 mm (3/4 in.) inlet sanitary flange, 6 mm (1/4 in.) outlet hose barb
General description
Preparation Note
3 autoclave cycles of 60 min @ 126 °C
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
- Storage Statement: Please refer to OPTISCALE®-25 user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Still not finding the right product?
Explore all of our products under OptiScale® 47 Capsule Media: Millipore Express® SHF 0.2 µm
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.