SLGSVR255F
Millex™ MCE syringe filter
pore size 0.22 μm, diam. 25 mm, sterile, hydrophilic, vented
동의어(들):
Millex™-GS Filter Unit, Vented Millex™-GS Filter Unit, vented syringe filter, domed filter, syringe filter
조직 및 계약 가격을 보려면 로그인를 클릭합니다.
크기 선택
보기 변경
제품정보 (DICE 배송 시 비용 별도)
NACRES:
NB.24
UNSPSC Code:
41104922
Pore size:
0.22 μm
Diam.:
25 mm
Sterility:
ethylene oxide treated, sterile
Material:
PVC housing, mixed cellulose esters (MCE) membrane
Packaging:
pack of 50 ea
Quality Segment
material
PVC housing, mixed cellulose esters (MCE) membrane
sterility
ethylene oxide treated, sterile
shelf life
3 yr
feature
hydrophilic, vented
packaging
pack of 50 ea
manufacturer/tradename
Millex™
technique(s)
sterile filtration: suitable
diam.
25 mm
filtration area
4 cm2
housing diam.
29 mm
inlet to outlet H
27 mm
volume
100 mL
color
blue base
matrix
MF-Millipore™
pore size
0.22 μm
input
aqueous solution(s)
bubble point
≥50 psi, water
fitting
female Luer-Lok® inlet, male Luer outlet slip
General description
Vented Millex™-GS filter units are syringe filters for sterilization of low volume aqueous solutions where venting is desired.
Application
Syringe filter for vented sterile filtration of low volume aqueous solutions
Biochem/physiol Actions
Materials
Filter membrane: Hydrophilic MF-Millipore® mixed cellulose esters (MCE), type GS, pore size 0.22 μm
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm² (0.62 in2)
Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.2 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge
Sterilization method: Ethylene oxide gas
Connections: Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 0.7 bar (10 psi), 21 °C: ≥ 30 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, blue outlet
Filter membrane: Hydrophilic MF-Millipore® mixed cellulose esters (MCE), type GS, pore size 0.22 μm
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm² (0.62 in2)
Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.2 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge
Sterilization method: Ethylene oxide gas
Connections: Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 0.7 bar (10 psi), 21 °C: ≥ 30 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, blue outlet
Features and Benefits
- For research use only (RUO)
- Single use only
- Vented inlet to prevent air locking
- Non-pyrogenic and non-toxic
Legal Information
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
MF-Millipore is a trademark of Merck KGaA, Darmstadt, Germany
Millex is a trademark of Merck KGaA, Darmstadt, Germany
Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Millex™ MCE syringe filter
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.