SLSV0R25LS
Millex™ PVDF syringe filter
pore size 5.0 μm, diam. 25 mm, sterile, hydrophilic
동의어(들):
Millex™-SV Filter Unit, low-binding syringe filter, particulate filter
조직 및 계약 가격을 보려면 로그인를 클릭합니다.
크기 선택
보기 변경
제품정보 (DICE 배송 시 비용 별도)
NACRES:
NB.24
UNSPSC Code:
41104922
Pore size:
5.0 μm
Diam.:
25 mm
Sterility:
ethylene oxide treated, sterile
Material:
PVC housing, PVDF membrane
Packaging:
pack of 50 ea
Quality Segment
material
PVC housing, PVDF membrane
sterility
ethylene oxide treated, sterile
product line
Millex™
shelf life
3 yr
feature
hydrophilic
packaging
pack of 50 ea
manufacturer/tradename
Millex™
technique(s)
low protein-binding filtration: suitable, sterile filtration: suitable
diam.
25 mm
filtration area
4 cm2
housing size
29 mm
inlet to outlet H
25 mm
volume
100 mL
matrix
Durapore®
pore size
5.0 μm
input
tissue culture medium
particle-laden solution(s)
aqueous solution(s)
bubble point
≥3 psi, water
fitting
female Luer-Lok® inlet, male Luer outlet slip
General description
The bi-directionally supported Millex™-SV is a low-binding, syringe-operated filter for the filtration of aqueous, proteinaceous solutions where minimal sample loss is desired. It will remove particles, precipitates, and undissolved powders larger than 5.0 μm.
Application
Syringe filter for particle or aggregate removal from protein solutions such as monoclonal antibodies, extracted cellular or tissue-based solutions, hormones, and reactive materials.
Biochem/physiol Actions
Materials
Membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), type SV
Pore size: 5.0 µm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 25 mm (0.98 in.)
Diameter: 29 mm (1.14 in.)
Filtration: area 4 cm² (0.62 in2)
Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.2 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge
Sterilization method: Ethylene oxide gas
Connections: Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 600 mL/min
Bubble point (water): ≥ 3 psi
Color: clear inlet, clear outlet
Membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), type SV
Pore size: 5.0 µm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 25 mm (0.98 in.)
Diameter: 29 mm (1.14 in.)
Filtration: area 4 cm² (0.62 in2)
Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.2 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge
Sterilization method: Ethylene oxide gas
Connections: Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 600 mL/min
Bubble point (water): ≥ 3 psi
Color: clear inlet, clear outlet
Features and Benefits
- Single use only
- Low protein binding
- Non-pyrogenic and non-toxic
Legal Information
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.