1.52063
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 100 mm x 3 mm HPLC Columns Validation Kit (3 Columns from 3 different batches)
Synonym(s):
Chromolith® RP-18 endcapped 100-3 HPLC columns Validation Kit (3 columns from 3 different batches)
Select a Size
About This Item
Product Name
Chromolith® RP-18 endcapped, L × I.D. 100 mm x 3 mm HPLC columns Validation Kit (3 columns from 3 different batches)
material
PEEK column
Quality Level
agency
suitable for USP L1
product line
Chromolith®
feature
endcapped
packaging
pkg of 3 ea
extent of labeling
18% Carbon loading
parameter
200 bar pressure, 45 °C max. temp.
technique(s)
HPLC: suitable, LC/MS: suitable, mass spectrometry (MS): suitable (High)
column L × I.D.
10 cm × 3 mm
matrix
monolithic silica
matrix active group
C18 bonding phase
pore size
13 nm mesoporosity, 2 μm macroporosity
operating pH range
2-7.5
separation technique
reversed phase
storage temp.
no temp limit
General description
Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure.
Chromolith® Performance RP-18 endcapped 100-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Performance RP-18 endcapped 100-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® Performance RP-18 endcapped 100-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 100 mm length and 3 mm I.D. is the best choice for fast separations of complex samples on any HPLC and UHPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Legal Information
Still not finding the right product?
Explore all of our products under Chromolith® RP-18 endcapped
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.