Saltar al contenido
Merck

Development and validation of an LC-MS/MS method for determination of p-phenylenediamine and its metabolites in blood samples.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2015-06-16)
Khaled M Mohamed, Duncan Cromarty, Vanessa Steenkamp
RESUMEN

In some developing countries, p-phenylenediamine (PPD) is used in combination with Henna as hair dye or skin decoration. A sensitive LC-MS/MS method was developed and validated for the simultaneous determination of p-phenylenediamine (PPD) and its metabolites N-acetyl-p-phenylenediamine (MAPPD) and N,N-diacetyl-p-phenylenediamine (DAPPD) in human blood. Acetanilide was used as an internal standard (IS). The LC-MS/MS was operated under multiple reaction-monitoring mode using the electrospray positive ionization technique. The transition ions m/z 109→92, m/z 151→92, m/z 193→92, and m/z 136→77 were selected for the quantification of PPD, MAPPD, DAPPD, and IS, respectively. The linear range was 10-2000ng/mL for all the compounds. The absolute recoveries were 51.94, 56.20 and 54.88% for PPD, MAPPD and DAPPD, respectively. Intra- and inter-assay imprecision were lower than 14% (RSD), and the bias of the assay was lower than 15% for all the compounds. The stability studies demonstrated that critical degradation for PPD in blood samples and autosampler occurred after 6h, while MAPPD and DAPPD were stable in blood samples and the autosampler up to 48h and 24h, respectively. This newly developed method allows for the detection of PPD and its metabolites in blood samples in the clinical and forensic setting.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Diclorometano, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Formato de amonio, ≥99.995% trace metals basis
Sigma-Aldrich
Ammonium acetate, Molecular Biology, ≥98%
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Sigma-Aldrich
Ammonium acetate solution, Molecular Biology, 7.5 M
Sigma-Aldrich
Terc-butilmetil éter, anhydrous, 99.8%
Sigma-Aldrich
Acetanilida, 99%
Sigma-Aldrich
Ammonium acetate, 99.999% trace metals basis
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrilo, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Ammonium acetate, reagent grade, ≥98%
Sigma-Aldrich
Ammonium acetate, BioXtra, ≥98%
Sigma-Aldrich
Acetonitrilo solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Ácido fórmico, ≥95%, FCC, FG
Sigma-Aldrich
Acetonitrilo solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Acetanilida, purified by sublimation, ≥99.9%
Supelco
Acetonitrilo, HPLC grade, ≥99.93%
Sigma-Aldrich
Ácido fórmico, JIS special grade, ≥98.0%
Supelco
Ammonium formate solution, 10 mM in H2O, suitable for HPLC
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
1,4-Phenylenediamine dihydrochloride, ≥99.0%
Supelco
Diclorometano, ≥99.9%
Sigma-Aldrich
Acetonitrilo, ≥99.8%, suitable for HPLC
Sigma-Aldrich
Acetanilida, zone-refined, purified by sublimation, ≥99.95%
Sigma-Aldrich
Acetonitrilo, ≥99.8%, suitable for residue analysis, JIS 300
Supelco
Terc-butilmetil éter, HPLC grade, suitable for HPLC, 99.8%
Sigma-Aldrich
Diclorometano, JIS special grade, ≥99.0%
Sigma-Aldrich
Diclorometano, SAJ first grade, ≥99.0%
Sigma-Aldrich
Terc-butilmetil éter, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%