1.03728
Water
suitable for UHPLC, LiChrosolv®
동의어(들):
DI water, Deionized water
크기 선택
제품정보 (DICE 배송 시 비용 별도)
제품 이름
Water, for UHPLC-MS LiChrosolv®
Quality Level
agency
suitable for ASTM® 7968, suitable for ASTM® 7979, suitable for DIN 38407-42, suitable for EPA 1621, suitable for EPA 1633, suitable for EPA 533, suitable for EPA 537.1, suitable for EPA 8327, suitable for EPA ACB B21-02, suitable for EPA ACB B23-05b, suitable for EPA OTM-45, suitable for GB 31604.35-2016, suitable for GB 5009.253-2016, suitable for ISO 21675 2019, suitable for ISO 25101, suitable for ISO/CEN 15968-2010, suitable for SM 4500 - NH3
reg. compliance
suitable for FDA C-010.02
vapor pressure
23 hPa ( 20 °C)
product line
LiChrosolv®
form
liquid
technique(s)
HPLC: suitable, LC/MS: suitable, UHPLC: suitable
refractive index
n20/D 1.34 (lit.)
pH
7 (20 °C)
bp
100 °C (lit.)
mp
0 °C (lit.), 0.0 °C (32.0 °F)
solubility
water: miscible
density
1.000 g/mL at 3.98 °C (lit.)
cation traces
Al: ≤5 ppb, Ca: ≤5 ppb, Fe: ≤5 ppb, K: ≤5 ppb, Mg: ≤10 ppb, Na: ≤50 ppb
SMILES string
O
application(s)
PFAS testing
general analytical
storage temp.
2-30°C
InChI
1S/H2O/h1H2
InChI key
XLYOFNOQVPJJNP-UHFFFAOYSA-N
유사한 제품을 찾으십니까? 방문 제품 비교 안내
General description
Features and Benefits
- suitability tested and specified for UHPLC-MS and UHPLC-UV: for analytical flexibility
- specified quality in positive and negative in positive and negative electrospray ionization (ESI) and atmospheric-pressure chemical ionization-mass spectrometry (APCI-MS) for lowest detection limits and confidence in analyses for all important MS modes (test 1)
—ESI/APCI (+) < 2 ppb
—ESI/APCI (-) < 10 ppb - lowest impurity profile: for interference-free baselines (test 2)
- microfiltered through 0.2 μm filter (test 3) to provide:
—a long lifespan to filters and mechanical parts of HPLC systems
—reduced risk of column clogging - packed in borosilicate glass bottles for minimized metal ion contaminations
- lowest levels of trace metal impurities for a minimum metal ion adduct formation
—<5 ppb - lowest level of polyethylene glycol (PEG) impurities in UHPLC-MS solvent lineup (PEG S/N signal-to-noise-ratio < 50)
Other Notes
Legal Information
저장 등급
12 - Non Combustible Liquids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
문서
We present a fast and robust HPLC-MS/MS method that can be used for Remdesivir and three structural antiviral analogues
LC-MS/MS method quantifies similar polar nucleotide activated sugars using Supel™ Carbon LC column for simultaneous analysis.
필터 선정 및 시료/이동상 여과가 HPLC 역압과 컬럼의 수명에 어떤 영향을 미치는지 알아보세요.
A RPLC-MS workflow for mass analysis of non-reduced monoclonal antibody, trastuzumab, including calibration, and system suitability tests.
프로토콜
A complete SEC-UV workflow for quantifying monoclonal antibody fragments, monomers, and aggregates, including procedure for a system suitability test and heat stressing of antibodies.
A complete workflow for the intact and middle-up mass analysis of reduced and non-reduced monoclonal antibodies based on SEC-MS with sample preparation by protein-A affinity clean-up.
A step-by-step protocol for released N-linked glycan analysis of the monoclonal antibody adalimumab, based on UHPLC-FLR-MS and procainamide labeling.
SEC-MS protocol for rapid glycoprofiling of monoclonal antibodies with antibody purification and mass spectrometer calibration.
관련 콘텐츠
This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.
국제 무역 품목 번호
| SKU | GTIN |
|---|---|
| 1.03728.1002 | 04054839477348 |
| 1.03728.2002 | 04054839477355 |
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.