1.52020
Chromolith® HighResolution RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 25 mm x 4.6 mm HPLC Column
Sinónimos:
Chromolith® HighResolution RP-18 endcapped 25-4.6 HPLC column
Seleccione un Tamaño
Acerca de este artículo
Nombre del producto
Chromolith® HighResolution RP-18 desactivada, L × I.D. 25 mm x 4.6 mm HPLC column
material
PEEK column
Quality Level
agency
suitable for ISO/CEN 6304.09, suitable for USP L1
product line
Chromolith®
feature
endcapped
packaging
1 ea of
extent of labeling
15% Carbon loading, 18% Carbon loading
parameter
45 °C max. temp., 50 °C max. temp., 200 bar pressure
technique(s)
HPLC: suitable, LC/MS: suitable, mass spectrometry (MS): suitable (High)
column L × I.D.
2.5 cm × 4.6 mm
surface area
250 m2/g × 250 m2/g
matrix
highly porous, monolithic silica
matrix active group
C18 bonding phase, octadecylsilane (ODS), C18 bonding phase
pore size
1.15 μm macroporosity, 1.5 μm macroporosity, 15 nm mesoporosity
operating pH range
2-7.5
application(s)
PFAS testing
separation technique
reversed phase
storage temp.
no temp limit
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
General description
Chromolith® HighResolution RP-18 endcapped columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 Å), the surface modification is octadecylsilane with full end-capping.
Chromolith® HighResolution RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparableto a 2.7 to 3 μm particle size fully porous particulate column. Chromolith® HighResolution RP-18 endcapped columns are perfectly suitable for LC-MS applications.
The column dimension of 25 mm length and 4.6 mm I.D. is the best choice for very rapid separations on any HPLC System and rapid method development.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® HighResolution RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.52025] with the Chromolith® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Chromolith® HighResolution RP-18 endcapped columns are also available in 2 mm I.D. column dimension for perfect fit to UHPLC and UHPLC-MS needs.
Flyer: UHPLC-like performance - Rapid and Robust at Low Pressure - Chromolith® HighResolution RP-18 endcapped 2 mm I.D. HPLC Columns
Analysis Note
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 110000
Capacity factor (Anthracene): 3.3 - 4.6
Tailing (USP): 0.90 - 1.40 %
Selectivity
separation factor (anthracene/progesterone): 1.85 - 2.35
Legal Information
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico