MPGL04001
Millipak®フィルター
0.22 μm membrane filter to remove bacteria and particulates at the point of dispense. For Alpha-Q and Milli-Q® Academic / Biocel / Element / Synthesis / Plus / Gradient systems.
別名:
Millipak® 40 filter
ログインで組織・契約価格をご覧ください。
サイズを選択してください
表示を変更する
この商品について
UNSPSC Code:
41104212
NACRES:
JA.14
eCl@ss:
33050190
material
PVDF membrane
Quality Segment
sterility
non-sterile
feature
hydrophilic
packaging
pkg of 1 unit
manufacturer/tradename
Millipak®
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
impurities
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤1.5 mg/device
matrix
Durapore®
pore size
0.22 μm pore size
fitting
NPT inlet connection, outlet hose barb
compatibility
for use with Alpha-Q, for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Element, for use with Milli-Q® Gradient, for use with Milli-Q® Plus, for use with Milli-Q® Synthesis
shipped in
ambient
General description
Millipak® membrane products are designed for routine filtration applications in the laboratory. Millipak® filters are best-in-class, proven products used in lab water purification systems to remove bacteria and particulates to benefit the stringent requirements of scientific applications.
Application
Purified water filtered through a Millipak® 40 filter can be used for any laboratory application sensitive to bacteria and/or particulates.
Features and Benefits
- Millipak® membrane filters are made with Durapore® PVDF membranes, providing high flow rates and throughputs, low extractable and broad chemical compatibility.
- The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
- Millipak® membrane filters use a unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.
- Connect to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.
- The protective bell protects against intrusion of airborne contamination during dispensing.
- Care-free maintenance: the filter is easily fitted and replaced.
Preparation Note
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Analysis Note
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Gravimetric Extractables: after 24 hours in water at controlled room temperature
Other Notes
これらの製品はFDAの定めたGMP準拠の製造工場で製造されています。
Directions For Use:
- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: General laboratory analysis
- Intended Use: Water purification
- Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
- Storage Statement: Store in a dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Millipak®フィルター
試験成績書（COA）
製品のロット番号・バッチ番号を入力して、試験成績書（COA） を検索できます。ロット番号・バッチ番号は、製品ラベルに「Lot」または「Batch」に続いて記載されています。