1.52015
Chromolith® Si (monolithic) HPLC Columns
L × I.D. 100 mm x 10 mm Column
동의어(들):
Chromolith® SemiPrep Si 100-10 column
조직 및 계약 가격을 보려면 로그인를 클릭합니다.
크기 선택
보기 변경
제품정보 (DICE 배송 시 비용 별도)
UNSPSC Code:
41115709
NACRES:
SB.52
Matrix active group:
Silica bonding phase
Pore size:
13 nm mesoporosity, 2 μm macroporosity
Matrix:
monolithic silica
제품 이름
Chromolith® Si, L × I.D. 100 mm x 10 mm column
material
PEEK column
Quality Level
agency
suitable for USP L3
product line
Chromolith®
feature
endcapped: no
packaging
1 ea of
parameter
150 bar pressure, 45 °C max. temp.
technique(s)
HPLC: suitable (Semi Prep HPLC), LC/MS: suitable
column L × I.D.
10 cm × 10 mm
matrix
monolithic silica
matrix active group
Silica bonding phase
pore size
13 nm mesoporosity, 2 μm macroporosity
operating pH range
2-7.5
separation technique
hydrophilic interaction (HILIC), normal phase
storage temp.
no temp limit
General description
Chromolith® SemiPrep Si HPLC columns are ideally suited for direct scale-up from analytical to semiprep. This is because they offer faster sample throughput at a lower operating pressure compared to semi-prep columns packed with 5 μm particles.
Chromolith® SemiPrep 10 mm i.d. columns combine high separation speed with excellent performance. This makes them the perfect alternative to particulate columns of 10 mm i.d. (and even 21.2 mm i.d.). They have the same bimodal porous silica rod structure as Chromolith® analytical columns with an internal diameter of 4.6 mm. Their macropores are 2 μm in diameter and the mesopores are 13 nm. This combination dramatically reduces separation time while increasing efficiency.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
The recommended Guard-columns are:
Chromolith® SemiPrep Si 10-10 guard cartridges (3 pieces) [1.52035] with the Chromolith® Guard Cartridge Holder 10 mm x 10 mm [1.52037]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
Chromolith® SemiPrep 10 mm i.d. columns combine high separation speed with excellent performance. This makes them the perfect alternative to particulate columns of 10 mm i.d. (and even 21.2 mm i.d.). They have the same bimodal porous silica rod structure as Chromolith® analytical columns with an internal diameter of 4.6 mm. Their macropores are 2 μm in diameter and the mesopores are 13 nm. This combination dramatically reduces separation time while increasing efficiency.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
The recommended Guard-columns are:
Chromolith® SemiPrep Si 10-10 guard cartridges (3 pieces) [1.52035] with the Chromolith® Guard Cartridge Holder 10 mm x 10 mm [1.52037]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
Analysis Note
Pressure: ≤ 25 bar
Performance (2-nitroanisol)
Theoretical Plates (N/m) (2-nitroanisol): ≥ 80000
Capacity factor (2-nitroanisol): 1.4 - 1.9
Tailing (USP): 0.90 - 1.40 %
Selectivity
separation factor (2-nitroanisol/nitrobenzene): 3.45 - 3.95
Performance (2-nitroanisol)
Theoretical Plates (N/m) (2-nitroanisol): ≥ 80000
Capacity factor (2-nitroanisol): 1.4 - 1.9
Tailing (USP): 0.90 - 1.40 %
Selectivity
separation factor (2-nitroanisol/nitrobenzene): 3.45 - 3.95
Legal Information
Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
국제 무역 품목 번호
| SKU | GTIN |
|---|---|
| 1.52015.0001 | 04022536889047 |