콘텐츠로 건너뛰기
Merck

주요 문서

모든 문서 보기

SGW9A47HH3

Polysep™ II 2.0/1.2 µm nominal, OptiScale® Capsule

filtration area 17.7 cm², OptiScale® 47, pore size 2.0/1.2 μm

동의어(들):

Optiscale Capsule Polysep II 2.0/1.2 μm 1/4 in. HB/HB, Polysep™ II 2.0/1.2 µm nominal, OptiScale® Capsule

조직 및 계약 가격을 보려면 로그인를 클릭합니다.

크기 선택

보기 변경

제품정보 (DICE 배송 시 비용 별도)

eCl@ss:
32031690
UNSPSC Code:
23151806
기술 서비스
도움이 필요하신가요? 저희 숙련된 과학자 팀이 도와드리겠습니다.
도움 문의

제품 이름

OptiScale® 47 Capsule Media: Polysep™ II 2.0 / 1.2 µm Nominal, Max Pressure: 80 psi @ 25 °C

Quality Level

400

material

PVDF vent cap, borosilicate glass fiber (BGF) membrane, fluoroelastomer FKM seal, mixed cellulose esters (MCE) membrane, polycarbonate , polypropylene support

reg. compliance

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

sterility

non-sterile

sterilization compatibility

autoclavable compatible

product line

OptiScale® 47

feature

hydrophilic

manufacturer/tradename

OptiScale®

parameter

25 °C max. inlet temp., 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure

technique(s)

prefiltration: suitable

diam.

6.9 cm (2.7 in.)

filtration area

17.7 cm2

inlet connection diam.

1/4 in.

outlet connection diam.

1/4 in.

impurities

≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)

matrix

Polysep™ II

pore size

2.0/1.2 μm nominal pore size, 2.0/1.2 μm pore size

input

sample type liquid

fitting

inlet hose barb, outlet hose barb, (6 mm (1/4 in.) Hose Barb Inlet and Outlet)

General description

Device Configuration: Capsule

Features and Benefits

Format: Double Layer

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Other Notes

Directions for Use

  • Organism Retention: Bacterial
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
  • Storage Statement: Please refer OPTISCALE®-25 user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
Polysep is a trademark of Sigma-Aldrich Co. LLC

Still not finding the right product?

Explore all of our products under

wgk

WGK 2

pictograms

Health hazard
GHS08

signalword

Danger

hcodes

H350i

Hazard Classifications

Carc. 1B Inhalation

저장 등급

4.1B - Flammable solid hazardous materials

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

국제 무역 품목 번호

SKUGTIN
SGW9A47HH304053252248764