Sélectionner une taille de conditionnement
About This Item
Nom du produit
Chromolith® Si, L × I.D. 100 mm x 10 mm column
material
PEEK column
agency
suitable for USP L3
product line
Chromolith®
feature
endcapped: no
packaging
1 ea of
parameter
150 bar pressure
45 °C max. temp.
technique(s)
HPLC: suitable (Semi Prep HPLC)
LC/MS: suitable
column L × I.D.
10 cm × 10 mm
matrix
monolithic silica
matrix active group
Silica bonding phase
pore size
13 nm mesoporosity
2 μm macroporosity
operating pH range
2-7.5
separation technique
hydrophilic interaction (HILIC)
normal phase
storage temp.
no temp limit
Quality Level
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Analysis Note
Performance (2-nitroanisol)
Theoretical Plates (N/m) (2-nitroanisol): ≥ 80000
Capacity factor (2-nitroanisol): 1.4 - 1.9
Tailing (USP): 0.90 - 1.40 %
Selectivity
separation factor (2-nitroanisol/nitrobenzene): 3.45 - 3.95
General description
Chromolith® SemiPrep 10 mm i.d. columns combine high separation speed with excellent performance. This makes them the perfect alternative to particulate columns of 10 mm i.d. (and even 21.2 mm i.d.). They have the same bimodal porous silica rod structure as Chromolith® analytical columns with an internal diameter of 4.6 mm. Their macropores are 2 μm in diameter and the mesopores are 13 nm. This combination dramatically reduces separation time while increasing efficiency.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
The recommended Guard-columns are:
Chromolith® SemiPrep Si 10-10 guard cartridges (3 pieces) [1.52035] with the Chromolith® Guard Cartridge Holder 10 mm x 10 mm [1.52037]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
Legal Information
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique