1.11136
Iron Test Kit, colorimetric
0.1-50 mg/L (Fe), MQuant®
別名:
Iron Visual Test Kit
製品名
Iron Test, colorimetric, 0.1-50 mg/L (Fe), for use with MCOLORTEST®
specific analyte(s)
iron
measuring range
0.1-50 mg/L (Fe)
compatibility
for use with MCOLORTEST®
detection method
colorimetric
storage temp.
15-25°C
Quality Level
類似した製品をお探しですか？ 訪問 製品比較ガイド
General description
Method: colorimetric with color-matching vessel 0.1 - 0.3 - 0.5 - 1.0 - 2.5 - 5.0 - 7.5 - 12.5 - 25 - 50 mg/l Fe MQuant®
The MQuant® Iron test (formally MColortest®) measures bivalent and trivalent iron in its dissolved form and also fresh colloidal e.g. in
We also recommend this as a pretest for the oxygen determination with MQuant® Oxygen 1.11107 to check for iron interferences in the sample.
This test evaluates the color reaction based on the transmitted light method. So even turbid and colored water samples can be analyzed without further preparation. The color matching vessel is made of very durable, lightfast plastic, thus suitable for industrial areas and wet environments.
Method
All iron ions are reduced to iron(II) ions by hydroxylammonium chloride. In a buffered medium these react with 2,2′-bipyridine to form a red complex. The iron concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color zones of a color matching vessel.
Without the addition of hydroxylammonium chloride (reagent Fe-1), the test measures only iron(II). so a differentialtion is possible.
Using the refill pack 1.08023 containing all the reagents, the original test kit can be used for a very long time, making this a particularly economical and ecological system.
- Groundwater and surface water
- Waters from aquaculture
- Drinking water and mineral water
- Industrial water
- Wastewater and percolating water
- Boiler and boiler feed water, cooling water
- Food (e. g. wine) after appropriate sample pretreatment
We also recommend this as a pretest for the oxygen determination with MQuant® Oxygen 1.11107 to check for iron interferences in the sample.
This test evaluates the color reaction based on the transmitted light method. So even turbid and colored water samples can be analyzed without further preparation. The color matching vessel is made of very durable, lightfast plastic, thus suitable for industrial areas and wet environments.
Method
All iron ions are reduced to iron(II) ions by hydroxylammonium chloride. In a buffered medium these react with 2,2′-bipyridine to form a red complex. The iron concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color zones of a color matching vessel.
Without the addition of hydroxylammonium chloride (reagent Fe-1), the test measures only iron(II). so a differentialtion is possible.
Using the refill pack 1.08023 containing all the reagents, the original test kit can be used for a very long time, making this a particularly economical and ecological system.
The test measures bivalent and trivalent iron in its dissolved form and also fresh colloidal iron(III)hydroxide in e.g. groundwater and surface water, drinking water, industrial water and wastewater, whereas a differentiation between iron(II) and iron(III) is possible.
Legal Information
MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany
signalword
Warning
Hazard Classifications
Aquatic Chronic 3 - Carc. 2 - Eye Irrit. 2 - Met. Corr. 1 - Skin Irrit. 2 - Skin Sens. 1
保管分類
8B - Non-combustible, corrosive hazardous materials
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
適用法令
試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。
Please refer to KIT Component information
pdsc
Please refer to KIT Component information
prtr
Please refer to KIT Component information
fsl
Please refer to KIT Component information
ishl_indicated
Please refer to KIT Component information
ishl_notified
Please refer to KIT Component information
cart
キットコンポーネントの情報を参照してください
jan
試験成績書（COA）
製品のロット番号・バッチ番号を入力して、試験成績書（COA） を検索できます。ロット番号・バッチ番号は、製品ラベルに「Lot」または「Batch」に続いて記載されています。
グローバルトレードアイテム番号
| カタログ番号 | GTIN |
|---|---|
| 1.11136.0001 | 04022536130460 |
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら（テクニカルサービス）