1.12630
Spectromelt® A 100
di-lithiumtetraborate, for X-ray fluorescence analysis
サイズを選択してください
この商品について
Quality Segment
assay
≥99.0% (acidimetric)
form
solid
pH
9.1 (20 °C, 100 g/L in H2O, slurry)
mp
917 °C ((1683 °F))
solubility
141.2 g/L, water: 141.2 g/L at 20 °C (68 °F - OECD Test Guideline 105)
density
2.34 g/cm3 at 20 °C ((68 °F) - OECD Test Guideline 109)
bulk density
330 kg/m3
anion traces
chloride (Cl-): ≤50 ppm, phosphate (PO43-): ≤20 ppm, silicate (as SiO2): ≤100 ppm, sulfate (SO42-): ≤50 ppm
cation traces
Ag: ≤5 ppm, Al: ≤10 ppm, Ba: ≤5 ppm, Ca: ≤20 ppm, Cd: ≤5 ppm, Co: ≤5 ppm, Cr: ≤5 ppm, Cu: ≤5 ppm, Fe: ≤10 ppm, Ga: ≤5 ppm, K: ≤10 ppm, Mg: ≤5 ppm, Mn: ≤5 ppm, Na: ≤20 ppm, Ni: ≤5 ppm, Pb: ≤5 ppm, Sr: ≤5 ppm, Zn: ≤5 ppm
storage temp.
2-30°C
SMILES string
[B].[B].[B].[B].[Li].[Li].O.O.O.O.O.O.O
InChI
1S/4B.2Li.7H2O/h;;;;;;7*1H2
InChI key
DPYKRXYVXDYLEY-UHFFFAOYSA-N
Application
Analysis Note
Chloride (Cl): ≤ 50 ppm
Phosphate (PO₄): ≤ 20 ppm
Silicate (SiO₂): ≤ 100 ppm
Sulfate (SO₄): ≤ 50 ppm
Ag (Silver): ≤ 5 ppm
Al (Aluminium): ≤ 10 ppm
Ba (Barium): ≤ 5 ppm
Ca (Calcium): ≤ 20 ppm
Cd (Cadmium): ≤ 5 ppm
Co (Cobalt): ≤ 5 ppm
Cr (Chromium): ≤ 5 ppm
Cu (Copper): ≤ 5 ppm
Fe (Iron): ≤ 10 ppm
Ga (Gallium): ≤ 5 ppm
K (Potassium): ≤ 10 ppm
Mg (Magnesium): ≤ 5 ppm
Mn (Manganese): ≤ 5 ppm
Na (Sodium): ≤ 20 ppm
Ni (Nickel): ≤ 5 ppm
Pb (Lead): ≤ 5 ppm
Sr (Strontium): ≤ 5 ppm
Zn (Zinc): ≤ 5 ppm
Loss on ignition (800 °C): ≤ 1.0 %
Bulk density: about 120
Legal Information
signalword
Danger
Hazard Classifications
Acute Tox. 4 Oral - Eye Dam. 1 - Repr. 2
保管分類
13 - Non Combustible Solids
wgk
WGK 2
flash_point_f
Not applicable
flash_point_c
Not applicable
hcodes
適用法令
試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。
Class I Designated Chemical Substances
prtr