コンテンツへスキップ
Merck

主要文書

すべての文書を表示

MFGL10SL3

Millipak® Final Fill 100 Durapore®

Inlet: 1.5 in. Sanitary Flange Outlet: 1/2 in. Hose Barb Vent: 1/8 in. Hose Barb

別名:

Durapore® 0.22 µm, Millipak® Final Fill Capsule

ログインで組織・契約価格をご覧ください。

サイズを選択してください

表示を変更する

この商品について

UNSPSC Code:
23151806
テクニカルサービス
お困りのことがあれば、経験豊富なテクニカルサービスチームがお客様をサポートします。
お手伝いします

製品名

Durapore® 0.22 µm、Millipak®Final Fillカプセル, Inlet: 1.5 in. Sanitary Flange Outlet: 1/2 in. Hose Barb Vent: 1/8 in. Hose Barb

Quality Segment

400

material

PVDF membrane, polysulfone device, polysulfone housing, polysulfone support, silicone O-ring

reg. compliance

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

sterility

sterile

product line

Millipak® Final Fill

feature

hydrophilic

manufacturer/tradename

Durapore®

parameter

0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)

technique(s)

sterile filtration: suitable

filter diam.

8.1 cm (3.2 in.)

filter filtration area

500 cm2

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

matrix

Durapore®

pore size

0.22 μm pore size

bubble point

≥50 psi (3450 mbar), air with water at 23 °C

fitting

38 mm (1 1/2 in.) inlet sanitary flange, outlet hose barb (13 mm (1/2 in. ))

General description

Device Configuration: Gamma Gold Capsule

Packaging

Double Easy-Open bag

Preparation Note

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ≤40  kGy gamma exposure.

This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

Analysis Note

Bacterial Grow-Through: Quantitative retention of 1 x 107 CFU/cm2 Brevundimonas diminuta ATCC® 19146 per ASTM® F838 methodology.

Other Notes

Directions for Use
  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer general guidelines section of user guide shipped with this product
  • Storage Statement: Please refer user guide shipped with this product
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials
ATCC is a registered trademark of American Type Culture Collection
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Still not finding the right product?

Explore all of our products under Durapore® 0.22 µm、Millipak®Final Fillカプセル

Emprove®プログラムを使用してGMPを遵守します。

Emprove® Dossiersで資格認定を加速し、コンプライアンスを維持し、時間を節約しましょう。

Dossiers をダウンロード

注意: EmproveSuite.comに移動します。ユーザー名とパスワードはSigmaAldrich.comとは別のもので、異なる場合があります。

無料会員登録すると、数分でEmprove® Dossiersにアクセスできます。 購読プランをアップグレードして、Emprove® Suiteの高度でカスタマイズされたコンテンツをアンロックしてください。

お探しのものが見つかりませんか？Emprove® プログラムのヘルプページをご覧ください。.

以前この製品を購入いただいたことがある場合

文書ライブラリで、最近購入した製品の文書を検索できます。

文書ライブラリにアクセスする