SSCSHB2A01
Lynx® S2S
1/2" Lynx® S2S Connector Set, 1/2" hose barb male inlet and 1/2" hose barb female outlet
別名:
Sterile to sterile single-use, single actuation connector
サイズを選択してください
この商品について
Quality Segment
material
polysulfone (21 CFR 177.1655), silicone O-ring (21 CFR 177.2600), silicone gasket (21 CFR 177.2600)
sterility
non-sterile
product line
Lynx®
parameter
4-40 °C operating temperature (39-104 °F), 4.1 bar max. pressure (60 psi) (operating pressure), 71.9 L/min flow rate at 1.38 bar (20 psi) and 25 °C (77°F)
L × W
12.2 cm (4.7 in.) × 5 cm (2 in.)
fitting
1/2 in. inlet hose barb for 0.43 in (10.9 mm) I.D., 1/2 in. outlet hose barb for 0.43 in (10.9 mm) I.D.
General description
The SSCSHB2A01 Lynx S2S connector set is constructed of a female coupling and a male coupling. With these two components assembled, the sterile fluid path is enabled. Once assembled, the two components cannot be disassembled, reducing the risk of sterility breach.
This Lynx S2S unit has a 1/2 inch. diameter and a hose barb inlet/outlet connection.
Safe, Disposable Connectors
The Lynx S2S connector is disposable and intended for single-use, one-time actuation. There are no parts to clean-in-place, and the risk of contamination is reduced.
Sterility Assurance During Actuation
The Lynx S2S connector is 100% air-integrity tested in manufacturing. Connector sets were tested utilizing an aerosolized bacterial challenge method with 106 B. diminuta and direct bacterial soiling method with B. diminuta, assuring a sterile connection can be made in non-classified areas.
Application
By design, a sterile connector should protect the fluid path by never exposing it to the open environment. The Lynx® S2S connector employs a solid plug, not a membrane or peel strip, which creates a gap for ingress of contamination during the connection process. The Lynx® S2S design provides high-pressure sealing and a flow path that remains completely closed, minimizing the risk of bacterial intrusion. It will secure the fluid path at a sterility assurance level (SAL) of 10-6 under the most rigorous conditions. Once assembled, the two components cannot be disassembled, reducing the risk of sterility breach. The male-female connection design adds safety to the process, limiting the risks of wrong connection in critical steps. Lynx® S2S: the only plug style device with a SAL of 10-6
Preparation Note
ガンマ線対応 45 kGyまで; オートクレーブ 1回 30 分@ 130 °C。 インライン蒸気滅菌不可。
Legal Information
Still not finding the right product?
Explore all of our products under Lynx® S2S
Emprove®プログラムを使用してGMPを遵守します。
Emprove® Dossiersで資格認定を加速し、コンプライアンスを維持し、時間を節約しましょう。
注意: EmproveSuite.comに移動します。ユーザー名とパスワードはSigmaAldrich.comとは別のもので、異なる場合があります。
無料会員登録すると、数分でEmprove® Dossiersにアクセスできます。 購読プランをアップグレードして、Emprove® Suiteの高度でカスタマイズされたコンテンツをアンロックしてください。
お探しのものが見つかりませんか？Emprove® プログラムのヘルプページをご覧ください。.