Saltar al contenido
Merck

428302

Polysulfone

average Mw ~35,000 by LS, average Mn ~16,000 by MO, pellets (Transparent)

Sinónimos:

Poly[oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-1,4-phenylene(1-methylethylidene)-1,4-phenylene], Polysulfone resin

Iniciar sesión para ver los precios por organización y contrato.

Seleccione un Tamaño

Acerca de este artículo

Fórmula lineal:
[C6H4-4-C(CH3)2C6H4-4-OC6H4-4-SO2C6H4-4-O]n
Número CAS:
25135-51-7
UNSPSC Code:
12162002
PubChem Substance ID:
24866807
NACRES:
NA.23
MDL number:
MFCD00134387

Documentos clave

Ver Toda la documentación
Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarle
Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarle

Nombre del producto

Polysulfone, average Mw ~35,000 by LS, average Mn ~16,000 by MO, pellets (Transparent)

InChI

1S/C15H16O2.C12H10O4S/c1-15(2,11-3-7-13(16)8-4-11)12-5-9-14(17)10-6-12;13-9-1-5-11(6-2-9)17(15,16)12-7-3-10(14)4-8-12/h3-10,16-17H,1-2H3;1-8,13-14H

InChI key

ZUZZUJNBGCVPLQ-UHFFFAOYSA-N

SMILES string

CC(C)(c1ccc(O)cc1)c2ccc(O)cc2.Oc3ccc(cc3)S(=O)(=O)c4ccc(O)cc4

form

pellets (Transparent)

autoignition temp.

1022 °F

melt index

6.5 g/10 min (343°C/0.3 Mpa)

mol wt

average Mn ~16,000 by MO
average Mw ~35,000 by LS

reduced viscosity

0.37-0.39 dL/g, 0.2 % (w/v) in chloroform(25 °C)(lit.)

density

1.24 g/mL at 25 °C (lit.)

Quality Level

100

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Application

Microwave cookware, appliance covers, surgical tools, automotive electrical components, printed circuit boards and plumbing components.

Features and Benefits

High impact resistance. Temperature use range up to 160°C. Exceptional steam sterilization stability. Electrical properties are maintained over a wide temperature and frequency range. High resistance to radiation degradation.

Physical form

Thermoplastic engineering polymer.

Clase de almacenamiento

11 - Combustible Solids

wgk

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
0000476422
0000476422
MKCX8611
0000463665
0000463665

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Yong Soo Choi et al.
Talanta, 94, 353-355 (2012-05-23)
Ultrapure water produced by a water purification system is one of the most essential and widely used reagents in laboratories. However, its quality is usually the least well-characterized and often overlooked. Here we investigate the contamination of ultrapure water by
Marinela Z Knezevic et al.
Renal failure, 34(7), 849-855 (2012-05-23)
The quality of life in patients undergoing hemodialysis is significantly disturbed. There are data that hemodiafiltration (HDF) may be more effective than conventional hemodialysis in the removal of uremic toxins and may reduce frequency and severity of intradialytic and postdialysis
M U M Junaidi et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 67(9), 2102-2109 (2013-05-10)
Although ultrafiltration (UF) membranes are applicable in wastewater and water treatment, most UF membranes are hydrophobic and susceptible to severe fouling by natural organic matter. In this work, polysulfone (PSf) membrane was blended with silicaluminophosphate (SAPO) nanoparticles, SAPO-34, to study
Christopher G Arges et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(7), 2490-2495 (2013-01-22)
Anion exchange membranes (AEMs) find widespread applications as an electrolyte and/or electrode binder in fuel cells, electrodialysis stacks, flow and metal-air batteries, and electrolyzers. AEMs exhibit poor stability in alkaline media; their degradation is induced by the hydroxide ion, a
Seungil Cho et al.
Talanta, 101, 537-540 (2012-11-20)
The paper presents the development of a multiple consecutive extraction method enabling the determination of the total amount of bisphenol A (BPA) released from porous polysulfone (PS) membranes in a hemodialyzer or hemoconcentrator under simulated-use conditions. The levels of BPA
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico