Se você fechar esta página, sua customização não será salva, a não ser que você tenha adicionado o item ao seu carrinho de compras ou favoritos.
Clique em OK para fechar a ferramenta MILLIPLEX® MAP ou em Cancelar para voltar para suas seleções.
Selecione Painéis customizáveis e kits pré-misturados - OU - MAPmates™ para sinalização celular
Monte e veja o preço de seus kits MILLIPLEX® MAP.
Painéis customizáveis e kits pré-misturados
Nosso amplo portfólio é composto por painéis multiplex que permitem que você escolha, dentro do painel, os analitos mais adequados às suas necessidades. Em outra aba, você pode selecionar o formato citoquina pré-misturada ou um kit single plex.
Kits de sinalização celular e MAPmates™
Selecione os kits fixos que permitem que você explore vias ou processos inteiros. Ou monte seus próprios kits escolhendo MAPmates™ Single plex e seguindo as diretrizes fornecidas.
Os MAPmates™ a seguir não devem ser combinados: -MAPmates™ que usem tampões diferentes. -Pares de MAPmate™ totais e fosfo-específicos, tais como total GSK3β e GSK3β (Ser 9). -PanTyr e MAPmates™ específicos para determinados sítios, tais como Phospho-EGF Receptor e phospho-STAT1 (Tyr701). -Mais de 1 fosfo-MAPmate™ para um único alvo (Akt, STAT3). -GAPDH e β-Tubulin não podem ser combinados com kits ou MAPmates™ que contenham panTyr.
.
Número de catálogo
Descrição para pedidos
Qtde/Emb.
Lista
Este item foi adicionado a seus favoritos.
Selecionar uma espécie, tipo de painel, kit ou tipo de amostra
Para começar a montar seu kit MILLIPLEX® MAP, selecionar uma espécie, um tipo de painel ou um kit de interesse.
Custom Premix Selecting "Custom Premix" option means that all of the beads you have chosen will be premixed in manufacturing before the kit is sent to you.
Catalogue Number
Ordering Description
Qty/Pack
List
Este item foi adicionado a seus favoritos.
Espécies
Tipo de painel
Kit selecionado
Qtde.
Número de catálogo
Descrição para pedidos
Qtde/Emb.
Preço de tabela
96-Well Plate
Qtde.
Número de catálogo
Descrição para pedidos
Qtde/Emb.
Preço de tabela
Adicionar outros reagentes (Tampão e Kit de Detecção necessário para o uso com MAPmates)
Qtde.
Número de catálogo
Descrição para pedidos
Qtde/Emb.
Preço de tabela
48-602MAG
Buffer Detection Kit for Magnetic Beads
1 Kit
Opção de economia de espaço Os clientes que adquirirem vários kits podem salvar espaço de armazenagem eliminando a embalagem do kit e recebendo os componentes de seu ensaio multiplex em sacos plásticos para armazenagem mais compacta.
Este item foi adicionado a seus favoritos.
O produto foi adicionado ao seu carrinho
Agora você pode customizar outro kit, escolher um kit pré-misturado, finalizar a compra ou fechar a ferramenta de pedido.
Original design for a centrifugal ultrafiltration device, from the patent owned by Amicon Separation Sciences Bowers, William F., and Peter N. Rigopulos. Centrifugal Microconcentrator and Methods for Its Use. W. R. Grace & Co., assignee. Patent US 4632761 A. 30 Dec. 1986. Print.
The Original Amicon® Filter: Concentrating on Your Data Since 1965.
Since our original research on protein concentration using ultrafiltration1, we’ve arrived at perfection.
Today’s Amicon® Ultra filters are made with high-quality Ultracel® regenerated cellulose membrane. On this page, you’ll find technical information on the properties of ultrafiltration membranes and how they have been optimized for protein concentration and the fine separation of other macromolecular solutes.
1Blatt, WF et al. “Protein Solutions: Concentration by a Rapid Method.” Science. October 8, 1965, Vol. 150, No. 3693, p. 224-226.
Ultrafiltration Membranes
Ultrafiltration (UF) is the process of separating extremely small particles and dissolved molecules from fluids. The primary basis for separation is molecular size, although in all filtration applications, the permeability of a filter medium can be affected by the chemical, molecular or electrostatic properties of the sample.
Ultrafiltration can only separate molecules which differ by at least an order of magnitude in size. Molecules of similar size cannot be separated by ultrafiltration. Materials ranging in size from 1K to 1000K molecular weight (MW) are retained by certain ultrafiltration membranes, while salts and water will pass through. Colloidal and particulate matter can also be retained.
Ultrafiltration membranes can be used both to purify material passing through the filter and also to collect material retained by the filter. Materials significantly smaller than the pore size rating pass through the filter and can be depyrogenated, clarified and separated from high molecular weight contaminants. Materials larger than the pore size rating are retained by the filter and can be concentrated or separated from low molecular weight contaminants.
Ultrafiltration is typically used to:
Separate proteins from buffer components for buffer exchange, desalting, or concentration
Remove or exchange of sugars
Remove or exchange non-aqueous solvents
Separate free from protein-bound ligands
Remove materials of low molecular weight
Rapidly change ionic and/or pH environment
Depending on the protein to be retained, the most frequently used membranes have a nominal molecular weight limit (NMWL) of 3 kDa to 100 kDa.
Comparing Ultrafiltration and Microfiltration Membranes
Ultrafiltration membranes, such as Ultracel® regenerated cellulose membrane, generally have two distinct layers:
Thin (0.1-1.5 µm), dense skin with a pore diameter of 10-400 angstroms
More porous substructure below the skin
Any species capable of passing through the pores of the skin can therefore freely pass through the membrane. In regenerated cellulose, pore size is precisely controlled during a hydrolysis step inherent to the manufacturing process. Another advantage of regenerated cellulose is that it is amenable to heat-sealing and welding, which makes adhesives unnecessary. As a result, it is possible to manufacture regenerated cellulose-based devices that leach very few extractable impurities into the sample.
Microporous membranes (such as polyethersulfone) are generally rigid, continuous meshes of polymeric material with defined pore sizes. They are used to retain bacteria, colloids and particulates. Species are either retained on the membrane or are trapped in its substructure.
Cross-section of ultrafiltration membrane with skin and porous substructure.
Cross-section of traditional microporous membrane with uniform pore structure from top to bottom.
Which Membrane Should You Choose for Ultrafiltration?
Our customers have asked for a quick summary of membranes commonly used in filter devices to help understand the difference between ultrafiltration and microfiltration. We’ve summarized a few popular membranes in the table below.
Membrane
Appropriate for Ultrafiltration?
Appropriate for Microfiltration?
Ultracel® regenerated cellulose
BEST
N/A
Polyethersulfone (PES) (e.g. Biomax® membrane or Millipore Express® PLUS PES)