Qty	Catalogue Number	Ordering Description	Qty/Pack	List Price
			96-Well Plate

Qty	Catalogue Number	Ordering Description	Qty/Pack	List Price
	48-602MAG	Buffer Detection Kit for Magnetic Beads	1 Kit

2145 MilliporeCompartment Protein Extraction Kit

Compartment Protein Extraction Kit MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.

SDS
CoA
Data Sheet
Newsletters / Publications
Required Licenses

Key Applications: Protein Extraction

2145

1 kit

Retrieving price...

Price could not be retrieved

Minimum Quantity is a multiple of

Maximum Quantity is

Upon Order Completion

You Saved ()

—

Request Pricing

—

In Stock

Discontinued

Limited Quantities Available

Availability to be confirmed

Remaining : Will advise

Will advise

Contact Customer Service

Quantity:

Overview

Replacement Information

Description
Catalogue Number	2145
Brand Family	Chemicon®
Trade Name	Chemicon
Description	Compartment Protein Extraction Kit
Overview	One of the challenges of functional proteomics is separation of complex protein mixtures for quantitative and differential subcellular localization analysis. This necessitates standardized and repeatable operation procedures to isolate subcellular proteomes from tissues and cells. The Chemicon Compartmental Protein Extraction Kit addresses the challenge by providing an innovative, easy-to-perform, and cost-effective method to sequentially isolate cytoplasmic, nuclear, membrane, and cytoskeleton proteins from mammalian tissues and cells based on a proprietary technique. This kit contains enough reagents to enrich four compartmental proteins from 5 grams tissues or approximately 125 million cells. The efficiency of subcellular fractionation has been investigated by SDS-PAGE and immunoblotting of selected marker proteins.
Materials Required but Not Delivered	· Tissue Homogenizer · Centrifuge and Microcentrifuge

References

Product Information
Components	Buffer C [HEPES (pH7.9), MgCl2, KCl, EDTA, Sucrose, Glycerol, Sodium OrthoVanadate] 1 x 18 mL (2-8°C) Buffer W [HEPES (pH7.9), MgCl2, KCl, EDTA, Sucrose, Glycerol, Sodium OrthoVanadate] 2 x 25 mL (2-8°C) Buffer N [HEPES (pH7.9), MgCl2, NaCl, EDTA, Glycerol, Sodium OrthoVanadate] 6 mL (2-8°C) Buffer M [HEPES (pH7.9), MgCl2, KCl, EDTA, Sucrose, Glycerol, Sodium deoxycholate, NP-40, Sodium OrthoVanadate] 6 mL (2-8°C) Buffer CS [Pipes (pH6.8), MgCl2, NaCl, EDTA, Sucrose, SDS, Sodium OrthoVanadate] 3 mL (2-8°C) 50 x PI [ A cocktail of protease inhibitors] 0.66 mL (-20°C)

Product Information

Components

Buffer C [HEPES (pH7.9), MgCl2, KCl, EDTA, Sucrose, Glycerol, Sodium OrthoVanadate] 1 x 18 mL (2-8°C)
Buffer W [HEPES (pH7.9), MgCl2, KCl, EDTA, Sucrose, Glycerol, Sodium OrthoVanadate] 2 x 25 mL (2-8°C)
Buffer N [HEPES (pH7.9), MgCl2, NaCl, EDTA, Glycerol, Sodium OrthoVanadate] 6 mL (2-8°C)
Buffer M [HEPES (pH7.9), MgCl2, KCl, EDTA, Sucrose, Glycerol, Sodium deoxycholate, NP-40, Sodium OrthoVanadate] 6 mL (2-8°C)
Buffer CS [Pipes (pH6.8), MgCl2, NaCl, EDTA, Sucrose, SDS, Sodium OrthoVanadate] 3 mL (2-8°C)
50 x PI [ A cocktail of protease inhibitors] 0.66 mL (-20°C)

Applications
Key Applications	Protein Extraction
Application Notes	- Detection of differential post-translational modifications or differential subcellular localization of target proteins - Enrichment of low-abundance proteins for visualization and subsequent analysis - Preparation of nuclear extract from mammalian tissues and cultured cells is crucial for studying DNA binding proteins such as transcription factors employing gel mobility shift techniques - Preparations of cytoplasmic fractions are useful to study soluble proteins abundant in cytosol - Preparations of membrane fractions to study membrane proteins such as receptors - Preparations of cytoskeleton fractions to study cytoskeleton proteins PROTOCOL: For buffers C, N, M and CS, add 50X PI to working concentration of 1X before use. 1. Weigh a certain amount of tissue (Wt grams), chop into small pieces, then pipette ice cold buffer C using 2.0 mL per gram tissue or per 20 million cells. Homogenize* the tissue or cells at moderate speed (e.g. speed 4) for 20 seconds. Let it stand on ice for a few seconds, repeat homogenization twice more. 2. Rotate the mixture at 4°C for 20 minutes. 3. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Remove and save the supernatant in another tube. The cytoplasmic proteins are in the supernatant. 4. Wash the pellet with 4 mL of ice cold buffer W per gram of tissue/20 million cells, rotate at 4°C for 5 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Drain the supernatant. 5. Add 1.0 mL of ice cold buffer N per gram of tissue/20 million cells to the pellet from step 4, rotate at 4°C for 20 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Remove and save the supernatant in another tube. The nuclear proteins* are in the supernatant. 6. Add 1.0 mL of ice cold buffer M per gram of tissue/20 million cells to the pellet, rotate at 4°C for 20 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Remove and save the supernatant in another tube. The membrane proteins are in the supernatant. 7. Add 0.5 mL of ice cold buffer CS per gram of tissue/20 million cells to the pellet from step 6, rotate at 4°C for 20 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes; save the supernatant. 8. Wash the pellet with 1.5 mL of ice cold buffer C per gram of tissue/20 million cells, rotate at 4°C for 5 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes, save supernatant. 9. Combine the supernatants from step 7 and step 8. The cytoskeleton proteins are in the mixed solution. 10. Measure the protein concentrations of the four fractions. Aliquot and label the proteins properly and store at -70°C. * We recommend using IKA Ultra Turrax T25 Basic or similar model homogenizer for tissues. Manual homogenizer can also be used; the purpose of the homogenization is to get the tissue lysed completely without breaking the nuclear compartment. It may not be necessary to homogenize the cells; usually pipetting up and down the cells and getting them well resuspended is adequate. ** A dialysis step may be necessary if the nuclear fraction is going to be used for the gel mobility shift assay. TROUBLE SHOOTING: 1. Cytoplasmic proteins-carryover to nuclear and membrane fractionsRepeat the washing step (step 3 in the protocol) 1-2 times to completely remove cytoplasmic proteins. Add a washing step right after the nuclear protein extraction. 2. Nuclear proteins present in the cytoplasmic fractionThe tissue homogenization conditions were too harsh and the cytoplasmic membrane and nuclear membrane were broken. Decrease the speed and times of homogenization. 3. Nuclear proteins present in the membrane fractionRepeat the nuclear proteins-extraction step 1-2 times before membrane proteins-extraction. 4. Membrane proteins present in the cytoplasmic and nuclear fractionsThe tissue homogenization conditions were too harsh and the nuclear membrane was broken. 5. Protein degradations a. Make sure that PI was added to Buffers C, N, M and CS before use. b. 50X PI was not aliquoted during storage and lost activity when frozen-thawed too many times. c. Homogenize the tissue for less time (<20 sec), let the tube stand on ice for a few seconds before the next homogenization.

Applications

Key Applications

Protein Extraction

Application Notes

- Detection of differential post-translational modifications or differential subcellular localization of target proteins

- Enrichment of low-abundance proteins for visualization and subsequent analysis

- Preparation of nuclear extract from mammalian tissues and cultured cells is crucial for studying DNA binding proteins such as transcription factors employing gel mobility shift techniques

- Preparations of cytoplasmic fractions are useful to study soluble proteins abundant in cytosol

- Preparations of membrane fractions to study membrane proteins such as receptors

- Preparations of cytoskeleton fractions to study cytoskeleton proteins

PROTOCOL:

For buffers C, N, M and CS, add 50X PI to working concentration of 1X before use.

1. Weigh a certain amount of tissue (Wt grams), chop into small pieces, then pipette ice cold buffer C using 2.0 mL per gram tissue or per 20 million cells. Homogenize* the tissue or cells at moderate speed (e.g. speed 4) for 20 seconds. Let it stand on ice for a few seconds, repeat homogenization twice more.

2. Rotate the mixture at 4°C for 20 minutes.

3. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Remove and save the supernatant in another tube. The cytoplasmic proteins are in the supernatant.

4. Wash the pellet with 4 mL of ice cold buffer W per gram of tissue/20 million cells, rotate at 4°C for 5 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Drain the supernatant.

5. Add 1.0 mL of ice cold buffer N per gram of tissue/20 million cells to the pellet from step 4, rotate at 4°C for 20 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Remove and save the supernatant in another tube. The nuclear proteins* are in the supernatant.

6. Add 1.0 mL of ice cold buffer M per gram of tissue/20 million cells to the pellet, rotate at 4°C for 20 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes. Remove and save the supernatant in another tube. The membrane proteins are in the supernatant.

7. Add 0.5 mL of ice cold buffer CS per gram of tissue/20 million cells to the pellet from step 6, rotate at 4°C for 20 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes; save the supernatant.

8. Wash the pellet with 1.5 mL of ice cold buffer C per gram of tissue/20 million cells, rotate at 4°C for 5 minutes. Spin at 18,000 to 20,000 x g at 4°C for 20 minutes, save supernatant.

9. Combine the supernatants from step 7 and step 8. The cytoskeleton proteins are in the mixed solution.

10. Measure the protein concentrations of the four fractions. Aliquot and label the proteins properly and store at -70°C.

* We recommend using IKA Ultra Turrax T25 Basic or similar model homogenizer for tissues. Manual homogenizer can also be used; the purpose of the homogenization is to get the tissue lysed completely without breaking the nuclear compartment. It may not be necessary to homogenize the cells; usually pipetting up and down the cells and getting them well resuspended is adequate.

** A dialysis step may be necessary if the nuclear fraction is going to be used for the gel mobility shift assay.

TROUBLE SHOOTING:

1. Cytoplasmic proteins-carryover to nuclear and membrane fractionsRepeat the washing step (step 3 in the protocol) 1-2 times to completely remove cytoplasmic proteins. Add a washing step right after the nuclear protein extraction.

2. Nuclear proteins present in the cytoplasmic fractionThe tissue homogenization conditions were too harsh and the cytoplasmic membrane and nuclear membrane were broken. Decrease the speed and times of homogenization.

3. Nuclear proteins present in the membrane fractionRepeat the nuclear proteins-extraction step 1-2 times before membrane proteins-extraction.

4. Membrane proteins present in the cytoplasmic and nuclear fractionsThe tissue homogenization conditions were too harsh and the nuclear membrane was broken.

5. Protein degradations

a. Make sure that PI was added to Buffers C, N, M and CS before use.

b. 50X PI was not aliquoted during storage and lost activity when frozen-thawed too many times.

c. Homogenize the tissue for less time (<20 sec), let the tube stand on ice for a few seconds before the next homogenization.

Biological Information

Physicochemical Information

Dimensions

Materials Information

Toxicological Information

Safety Information according to GHS

Safety Information

Product Usage Statements
Usage Statement	Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

Storage and Shipping Information
Storage Conditions	Store Buffers C, W, N, M and CS at 2-8°C for up to 12 months after date of receipt. Store the 50X PI Buffer at -20°C in undiluted aliquots for up to 12 months after date of receipt. Avoid repeated freeze/thaw cycles.

Packaging Information
Material Size	1 kit

Transport Information

Supplemental Information

Specifications

Global Trade Item Number
Catalogue Number	GTIN
2145	04053252025440

Documentation

Required Licenses

Title
PRODUCTO REGULADO POR LA SECRETARÍA DE SALUD

Compartment Protein Extraction Kit SDS

Title
Safety Data Sheet (SDS)

Compartment Protein Extraction Kit Certificates of Analysis

Title	Lot Number
COMPARTMENTAL PROTEIN EXTRACTION KIT	VP1812080
COMPARTMENTAL PROTEIN EXTRACTION KIT	VP1808030
COMPARTMENTAL PROTEIN EXTRACTION KIT	VP1805150
COMPARTMENTAL PROTEIN EXTRACTION KIT - 2899557	2899557
COMPARTMENTAL PROTEIN EXTRACTION KIT - VP1903089	VP1903089
COMPARTMENTAL PROTEIN EXTRACTION KIT - VP1904093	VP1904093
COMPARTMENTAL PROTEIN EXTRACTION KIT - VP1907120	VP1907120
COMPARTMENTAL PROTEIN EXTRACTION KIT - VP1911220	VP1911220
COMPARTMENTAL PROTEIN EXTRACTION KIT - VP2201066	VP2201066
COMPARTMENTAL PROTEIN EXTRACTION KIT - VP2210261	VP2210261

Data Sheet

Title
COMPARTMENTAL PROTEIN EXTRACTION KIT

Newsletters / Publications

Title
Cellutions - The newsletter for Cell Biology Researchers Volume 3: 2011

The Product Has Been Added To Your Cart