Millipore Sigma Vibrant Logo

500095 OxyDNA Assay Kit, Fluorometric

OxyDNA Assay Kit, Fluorometric MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
500095
  
Retrieving price...
Price could not be retrieved
Minimum Quantity is a multiple of
Maximum Quantity is
Upon Order Completion More Information
You Saved ()
 
—
Request Pricing
—
Limited Availability Limited Availability
In Stock 
Discontinued
Limited Quantities Available
Availability to be confirmed
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service

       

      Contact Customer Service

      Overview

      Replacement Information
      Description
      Overview

      This product has been discontinued.



      Assay kit used to detect oxidative damage to DNA in vitro. Based on the direct binding of a fluorescent probe to the DNA adduct 8-oxoguanine, a major oxidation product and an important indicator of free radical-induced DNA damage and oxidative stress. The FITC-conjugate binds to 8-oxoguanine in damaged cells and fluorescence is monitored using flow cytometery (excitation 495 nm, emission 515 nm).
      Catalogue Number500095
      Brand Family Calbiochem®
      Materials Required but Not Delivered• Micropipettes: 20 µl to 100 µl, 200 µl to 1000 µl
      • Test tubes
      • 1 L beaker
      • Graduated cylinder
      • Reagents for fixing and permeabilising cells
      • Deionized/Distilled water
      • 37°C water bath
      • Flow cytometer with appropriate filter combination for FITC (excitation filter 495 nm, barrier filter 515 nm)
      References
      ReferencesSilva, P.F.N. et al. 2007. Theriogenology 67, 609.
      Babbar, N. and Casero, Jr., R.A. 2006. Cancer Res. 66, 11125.
      Lai, K.N., et al. 2006. Nephrol. Dial. Transplant. 21, 1188.
      Sampson, M.J. et al. 2006. Diabetes Care 29, 283.
      Maniscalco, W.M., et al. 2005. Pediatric Res. 58, 594.
      Osella, D., et al. 2005. Inorganica Chimica Acta 358, 1993.
      Adamek B et al. 2004. Polish Journal of Environmental Studies 13 Suppl. II, 29.
      Roper, J.M., et al. 2004. Am. J. Physiol. Lung Cell Mol. Physiol. 286, L1045.
      Ogawa, Y. et al. 2003. International Journal of Molecular Medicine 11, 27.
      Ogawa, Y. et al. 2003. International Journal of Molecular Medicine 11, 149.
      Sparrow J.R. et al. 2003. Investigative Ophthalmology and Visual Science (14)5, 2245.
      Tao Peng, H-M. et al. 2003. World J Gastroenterol 9, 2186.
      Riemschneider, S., et al. 2002. Acta Derm. Venereol. 82, 325.
      de Zwart, L.L., et al. 1999. Free Radic. Biol. Med. 26, 202.
      Tsurudome, Y., et al. 1999. Carcinogenesis 20, 1573.
      Inoue, M., et al. 1998. Jpn. J. Cancer Res. 89, 691.
      Kasai, H. 1997. Mutat. Res. 387, 147.
      Cooke, C., et al. 1996. Toxicol. Ecotoxicol. News 3, 101.



      Selected Citations
      Roper, J. M., et al. 2004. Am. J. Physiol. Lung Cell Mol. Physiol. 286, L1045.
      Babbar, N., and Casero, R. A., Jr., 2006. Cancer Res. 66, 23.
      Product Information
      Detection methodFlow cytometry or fluorescence microscopy
      Form50 Tests
      Kit containsWash Concentrate, Binding Protein-FITC Conjugate, and a user protocol.
      Quality LevelMQ100
      Applications
      Application ReferencesFluorescent Microscopy Lai, K.N., et al. 2006. Nephrol. Dial. Transplant. 21, 1188. Maniscalco, W.M., et al. 2005. Pediatric Res. 58, 594. Roper, J.M., et al. 2004. Am. J. Physiol. Lung Cell Mol. Physiol. 286, L1045. Other Applications Babbar, N. and Casero, Jr., R.A. 2006. Cancer Res. 66, 11125. Osella, D., et al. 2005. Inorganica Chimica Acta 358, 1993. Riemschneider, S., et al. 2002. Acta Derm. Venereol. 82, 325.
      Biological Information
      Assay time4 h
      Sample TypeCells
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Intended useThe Calbiochem® OxyDNA Kit is an in vitro fluorescent protein binding method for the detection of oxidative damage to DNA in fixed permeabilized cells using flow cytometry or fluorescence microscopy. Material of both human and animal origin can be tested.
      Storage and Shipping Information
      Ship Code Ambient Temperature Only
      Toxicity Multiple Toxicity Values, refer to MSDS
      Storage +2°C to +8°C
      Storage ConditionsUpon arrival store the entire contents of the kit at 4°C. Note: FITC conjugate must be stored in the dark.
      Do not freeze Ok to freeze
      Packaging Information
      Transport Information
      Supplemental Information
      Kit containsWash Concentrate, Binding Protein-FITC Conjugate, and a user protocol.
      Specifications
      Global Trade Item Number
      Catalogue Number GTIN
      500095 0

      Documentation

      OxyDNA Assay Kit, Fluorometric SDS

      Title

      Safety Data Sheet (SDS) 

      OxyDNA Assay Kit, Fluorometric Certificates of Analysis

      TitleLot Number
      500095

      References

      Reference overview
      Silva, P.F.N. et al. 2007. Theriogenology 67, 609.
      Babbar, N. and Casero, Jr., R.A. 2006. Cancer Res. 66, 11125.
      Lai, K.N., et al. 2006. Nephrol. Dial. Transplant. 21, 1188.
      Sampson, M.J. et al. 2006. Diabetes Care 29, 283.
      Maniscalco, W.M., et al. 2005. Pediatric Res. 58, 594.
      Osella, D., et al. 2005. Inorganica Chimica Acta 358, 1993.
      Adamek B et al. 2004. Polish Journal of Environmental Studies 13 Suppl. II, 29.
      Roper, J.M., et al. 2004. Am. J. Physiol. Lung Cell Mol. Physiol. 286, L1045.
      Ogawa, Y. et al. 2003. International Journal of Molecular Medicine 11, 27.
      Ogawa, Y. et al. 2003. International Journal of Molecular Medicine 11, 149.
      Sparrow J.R. et al. 2003. Investigative Ophthalmology and Visual Science (14)5, 2245.
      Tao Peng, H-M. et al. 2003. World J Gastroenterol 9, 2186.
      Riemschneider, S., et al. 2002. Acta Derm. Venereol. 82, 325.
      de Zwart, L.L., et al. 1999. Free Radic. Biol. Med. 26, 202.
      Tsurudome, Y., et al. 1999. Carcinogenesis 20, 1573.
      Inoue, M., et al. 1998. Jpn. J. Cancer Res. 89, 691.
      Kasai, H. 1997. Mutat. Res. 387, 147.
      Cooke, C., et al. 1996. Toxicol. Ecotoxicol. News 3, 101.



      Selected Citations
      Roper, J. M., et al. 2004. Am. J. Physiol. Lung Cell Mol. Physiol. 286, L1045.
      Babbar, N., and Casero, R. A., Jr., 2006. Cancer Res. 66, 23.

      Brochure

      Title
      Kit SourceBook - 2nd Edition EURO
      Kits SourceBook - 2nd Edition GBP
      User Protocol

      Revision07-February-2016 JSW
      Form50 Tests
      Detection methodFlow cytometry or fluorescence microscopy
      StorageUpon arrival store the entire contents of the kit at 4°C. Note: FITC conjugate must be stored in the dark.
      Intended useThe Calbiochem® OxyDNA Kit is an in vitro fluorescent protein binding method for the detection of oxidative damage to DNA in fixed permeabilized cells using flow cytometry or fluorescence microscopy. Material of both human and animal origin can be tested.
      BackgroundOxidative injury to macromolecules is indicated in a wide range of pathological conditions. Damage is mediated via free radicals that can be created by a range of agents, e.g. xenobiotics, environmental toxins, smoking, radiation, ischaemia-reperfusion injury oxidising agents and normal or disturbed metabolic activity. These free radicals may react with DNA causing reversible and irreversible damage. This can lead to mutation, carcinogenesis, teratogenesis or cell death. The probe in the OxyDNA kit is specific for 8-oxoguanine. 8-oxoguanine (as part of the oxidized nucleotide 8-oxyguanosine) is formed during free radical damage to DNA and is a sensitive and specific indicator of oxidative DNA damage. 8-oxoguanine is a particularly important biomarker of oxidative DNA damage as it is formed in relatively large quantities and 8-oxoguanine formation can lead to mutations, such as the substitution of thymine for guanine and cytosine for adenine. Previously, 8-oxoguanine was difficult to detect, requiring HPLC analysis, however by utilizing a binding protein with high avidity and specificity for 8-oxoguanine, the OxyDNA kit provides a simple, convenient, sensitive fluorescence method for detecting for oxidative DNA damage.
      Principles of the assayThe Calbiochem® OxyDNA Kit utilizes a direct fluorescent protein binding technique. After cells have been fixed and permeabilized, the FITC-Conjugate is added and binds to the 8-oxoguanine moiety present in the 8-oxoguanosine of oxidized DNA. The presence of oxidized DNA is indicated by a green/yellow fluorescence that can be read using flow cytometry or fluorescence microscopy.
      Materials provided• Wash Concentrate (Kit component No. KP10401-55ML): 1 bottle, 55 ml, 25X Tris-buffered Saline/TWEEN® 20 Detergent (TBST), containing ProClin950 concentrate
      • FITC-Conjugate Concentrate (Kit Component No. KP10402-650UL): 1 vial, 0.650 ml Binding Protein conjugated to Fluorescein, containing ProClin950 and Bronidox L.
      Materials Required but not provided• Micropipettes: 20 µl to 100 µl, 200 µl to 1000 µl
      • Test tubes
      • 1 L beaker
      • Graduated cylinder
      • Reagents for fixing and permeabilising cells
      • Deionized/Distilled water
      • 37°C water bath
      • Flow cytometer with appropriate filter combination for FITC (excitation filter 495 nm, barrier filter 515 nm)
      Precautions and recommendations• The OxyDNA kit contains a chemical known to the State of California to cause birth defects or other reproductive harm (California Prop 65: thimerosal).
      • Dispose of all specimens in accordance with good laboratory practice.
      • Wear protective clothing, disposable latex gloves and eye protection while handling specimens and performing the assay. Wash hands thoroughly when finished.
      • Do not pipette materials by mouth and never eat or drink at the laboratory workbench.
      • Do not mix or substitute reagents from different kit lot numbers.
      • Care must be taken not to contaminate components and always use fresh pipette tips for each sample and component.
      • Do not use reagents that are cloudy or that have precipitated out of solution. High quality distilled or deionised water is required for the Wash Solution. The use of poor quality or contaminated water may lead to background colour in the assay.
      • Allow all reagents to come to room temperature (20-25°C) and mix well prior to use.
      • Avoid leaving reagents in direct sunlight and/or above 4°C for extended periods.
      • Always use clean, preferably disposable, glassware for all reagent preparation.
      PreparationLive cells should be shielded from high oxygen tensions (e.g. room air) and unnecessary mechanical stress (e.g. mixing and washing) as these can lead to increased oxidative DNA damage and high levels of fluorescence in untreated/control samples. DNA is more stable in fixed cells.
      Reagent preparation• Wash Solution: Dilute the Wash Concentrate 1:25 with diH2O. For example, to prepare 250 ml Wash Solution add 10 ml of Wash Concentrate to 240 ml diH2O. Prepare only the volume of Wash Solution required for the assay. • 1X FITC-Conjugate: Dilute the FITC-Conjugate 1:10 with Wash Solution. For example, to prepare 1 ml 1X FITC-Conjugate add 100 µl FITC-Conjugate to 900 µl Wash Solution. To dispense conjugate, remove cap and pipette directly from the bottle. Keep FITC-Conjugate solutions in the dark when not in use. These dilutions of FITC-Conjugate have been used successfully for a number of cell lines e.g. Hep G2, IMR-32 and CHO, sperm and lymphocytes. In some experimental situations, it may be necessary to optimize the dilution of the conjugate used. This will be dependent on the particular cell type used and the experimental conditions used to induce oxidative damage. If the incorrect concentration of conjugate is used, high background staining and non-specific binding may occur.
      Detailed protocolAssay Protocol for Flow Cytometry Assay

      Oxidative DNA damage can be found in most cell types and can be caused by many different mechanisms. As a result, the protocol outlined below should only be regarded as a guideline and the procedures may need to be modified according to the experimental model or cell type being studied.

      1. Fix and permeabilize the cells to be tested.
      2. Wash with Wash Solution.
      3. Add 100 µl 1X FITC-Conjugate to the cell pellet and incubate in the dark for 60 min at room temperature.
      4. Wash with Wash Solution.
      5. Read fluorescence using a flow cytometer at an excitation wavelength of 495 nm and barrier filter of 515 nm.
      SpecificityThe Calbiochem® OxyDNA Kit is specific for the 8-oxoguanine moiety of 8-oxoguanosine present in oxidized DNA and shows no measurable cross reactivity with unoxidized guanine / guanosine or other unoxidized nucleotides.
      Application referencesFluorescent Microscopy Lai, K.N., et al. 2006. Nephrol. Dial. Transplant. 21, 1188. Maniscalco, W.M., et al. 2005. Pediatric Res. 58, 594. Roper, J.M., et al. 2004. Am. J. Physiol. Lung Cell Mol. Physiol. 286, L1045. Other Applications Babbar, N. and Casero, Jr., R.A. 2006. Cancer Res. 66, 11125. Osella, D., et al. 2005. Inorganica Chimica Acta 358, 1993. Riemschneider, S., et al. 2002. Acta Derm. Venereol. 82, 325.
      Registered TrademarksCalbiochem® is a registered trademark of EMD Chemicals, Inc.
      Tween® is a registered trademark of ICI Americas, Inc.
      Interactive Pathways™ is a trademark of EMD Chemicals, Inc.