Total Hardness Test Strips, reflectometric

function control: conforms
Assay
- standard 1:
3.1 - 3.9 °d
- standard 2: 8.8 - 10.8 °d
- standard 3: 22.7 - 27.7 °d

Method: reflectometric with test strips 0.1 - 30.0 °d Reflectoquant^®

The Reflectoquant total hardness test strips can be used to measure water hardness. The hardness (total hardness) is due to its content of salts of the alkaline earth metals calcium, magnesium, strontium, and barium (“hardening constituents”, later compounds only in traces). The reaction zones of the test strip, which are impregnated with differing amounts of Titriplex III, assume a green to red color, depending on the hardness of the water sample. The color is then determined reflectometrically on the RQflex^® 20. For pre-testing a sample in an economic and quick way to estimate the hardness and a possible dilution factor prior to using this quantitative method we recommend our semi-quantitative MQuant test strips for total hardness. Further quantitative determination methods can be found with our Spectroquant tests.

REFLECTOQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany

RQFLEX is a registered trademark of Merck KGaA, Darmstadt, Germany