Millipore Sigma Vibrant Logo

TRUE-HTS10 TrueGel3D™ HTS Hydrogel Plate

3D Cell Culture

View Products on Sigmaaldrich.com
TRUE-HTS10
10 Plate  
Prix en cours de récupération
Le prix n'a pas pu être récupéré
La quantité minimale doit être un multiple de
Maximum Quantity is
À la validation de la commande Plus d'informations
Vous avez sauvegardé ()
 
—
Demander le prix
—
Disponibilité limitée Disponibilité limitée
En stock 
Interrompu(e)
Disponible en quantités limitées
Disponibilité à confirmer
    Pour le restant : Nous vous tiendrons informé
      Pour le restant : Nous vous tiendrons informé
      Nous vous tiendrons informé
      Contacter le Service Clients
      Contact Customer Service

       

      Contacter le Service Clients

      Aperçu

      Replacement Information
      Description
      Catalogue NumberTRUE-HTS10
      DescriptionTrueGel3D™ HTS Hydrogel Plate
      OverviewThe TrueGel3D™ HTS Hydrogel Plate is a ready-to-use solution to easily establish 3D cell cultures using fully synthetic hydrogels in a simple and automation-compatible manner. The 96-well polystyrene glass bottom plates contain precasted synthetic functionalized PEG based hydrogels. These innovative hydrogels contain gradually increasing crosslinking densities throughout the well. Users can proceed directly with seeding cells without any hydrogel preparation or encapsulation steps. After cell seeding, cells will gradually infiltrate the hydrogel and establish a 3D cell culture environment within days. Furthermore, this newly engineered hydrogel surface gives the user the possibility to sequentially establish co-culture systems seeding different cell populations at different time-points in the same hydrogel.

      References
      Benjamin R Simona. Soft Hydrogels Featuring In-Depth Surface Density Gradients for the Simple Establishment of 3D Tissue Models for Screening Applications. SLAS Discov. 2017 Jun;22(5):635-644.
      Alternate Names
      • 3D Cell Culture Plate
      Background InformationProtocols

      General Protocol for Cell Seeding and Culture Maintenance

      Note: Before starting please verify the good status of the plate. The polyethylene (PE) pouch must be intact with no visible liquid inside. The plate must be intact inside the pouch. Open the PE pouch with scissors or a scalpel under the sterile laminar flow bench. Once removed from the pouch, the plate is still sealed on its top-side with a polypropylene (PP) adhesive foil which is keeping the content inside each of the 96 wells. From the glass bottom side, verify that the glass cover is intact and that the gels look transparent, like if the wells were filled with water.

      1. Warm assay plate. Make sure the plate was at room temperature for at least 30 minutes prior use.
      2. Prepare the cells and media to be used.
      3. Remove the sealing adhesive foil. Carefully peel off the sealing tape from the assay plate. We suggest to firmly hold the plate with the left hand on the table and peel off the sealing foil with the right hand starting from the top-right angle of the plate and slowly moving to the bottom-left angle of the plate. A liquid meniscus may form on top of the wells due to the negative pressure applied by removing the foil, but this meniscus pops and disappears within seconds.
      4. Aspirate the storage buffer. Insert the pipet tip in the well and descend along the side wall. Place the pipet tip on the plastic ring inside the well and carefully aspirate the storage saline buffer. It is normal to perceive a small suction resistance. Slightly lift the pipette tip and the liquid will be aspirated. Note: Do not touch or aspirate right over the gel because of the risk of damaging it. It is possible to use multichannel pipets or pumps (low suction pressure) to accelerate the process. It is acceptable If some storage buffer remains on the well because it is a Tris buffer which won’t negatively affect you culture development. Minimize time between step 4. and 5. to reduce the risk of drying the gel.
      5. Add cells and medium. Add the cell suspension with a maximum volume of 200 µL in each of the wells. Transfer the plate to the incubator. Keep cells in culture and change culture medium every 2nd day applying similar pipetting techniques as in step 4 and 5 to establish a 3D cell culture environment. Note: Residual trace activity of trypsin can result in digestion of the hydrogel. Especially when using serum free media, after detaching the cells, make sure to inhibit trypsin using a trypsin inhibitors or inactivating solutions (i.e. soybean). Optimal cell seeding density depends on culture types and readouts. To better control the concentration of your medium components, it is possible to soak and rinse the hydrogel with the culture medium before the addition of the cells.
      6. Sequential seeding of cells (optional). At a desired time point, remove medium and add a second cell population in co-culture medium (maximum volume of 200 µL per well). Keep in culture until assay end. Change medium every other day.
      References
      Product Information
      HS Code3824 99 89
      Device Configuration96-well plate
      Quality LevelMQ100
      Applications
      Application3D Cell Culture
      Key Applications
      • Cell Culture
      Biological Information
      SterilityOther
      Physicochemical Information
      Recommended Media Volume
      40 to 280 μL
      Dimensions
      Surface Area0.32 cm2
      Materials Information
      Device Material
      • Polystyrene
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Quality AssurancePlate Cleanliness: Particle count/well by microscope inspection <10.
      Hydrogel Transparency: Pass
      Hydrogel Thickness: Pass
      Microbiological Analysis: Negative for Microorganisms according to ISO 11737-1.
      Usage Statement
      • Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
      Storage and Shipping Information
      Storage ConditionsStore all components of the TrueGel3D™ HTS Hydrogel Plate at room temperature (do not freeze) away from direct sources of light and heat. Do not store upside down.
      Packaging Information
      Material Size10 Plate
      Transport Information
      Supplemental Information
      Specifications
      Global Trade Item Number
      Référence GTIN
      TRUE-HTS10 04065265138659