rapid mounting medium for microscopy
For general questions please contact our Customer Service:
Frankfurter Str. 250
Phone: +49 6151 72-0
Fax: +49 6151 72 2000
19 April 2014
Entellan® new is a mounting medium for cover slippers and is specially suited for commercial automated mounting instruments that operate with cover slippers. Its viscosity ranges between 500 and 600 mPas. This narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan® new. Entellan® new is an IVD registered product and CE certified, thus can be used for clinical diagnostic purposes.
|Alternative products for Entellan® new|
|107960||Entellan® rapid mounting medium for microscopy|
|100869||Entellan® new for cover slipper for microscopy|
|109016||Neo-Mount® anhydrous mounting medium for microscopy|
|HS Code||3208 20 10|
|Storage||Store at +15°C to +25°C.|
|Chemical and physical data|
|Ignition temperature||>250 °C|
|Solubility||(20 °C) insoluble|
|Density||0.95 g/cm3 (20 °C)|
|Boiling point||137 - 143 °C (1013 hPa)|
|Vapor pressure||< - 8 hPa (20 °C)|
|Explosion limit||1.1 - 8.0 %(V) (xylene)|
|Flash point||23 °C|
|Safety information according to GHS|
H226: Flammable liquid and vapour.
H312 + H332: Harmful in contact with skin or if inhaled
H315: Causes skin irritation.
P210: Keep away from heat.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
|Storage class||3 Flammable liquids|
|WGK||WGK 2 water endangering|
Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C.
Flammable.Harmful by inhalation and in contact with skin.Irritating to skin.
Wear suitable protective clothing and gloves.
|Categories of danger||flammable, harmful, irritant|
|Declaration (railroad and road) ADR, RID||UN 1866 Harzlösung, 3, III|
|Declaration (transport by sea) IMDG-Code||UN 1866 RESIN SOLUTION, 3, III|
|Declaration (transport by air) IATA-DGR||UN 1866 RESIN SOLUTION, 3, III|