Millipore Sigma Vibrant Logo

S7117 ApopTag® Plastic Coverslip

APOPTAG Plastic Coverslips are designed to be custom fitted to the specific APOPTAG kit application.

ApopTag® Plastic Coverslip: Ficha de datos de seguridad (MSDS o SDS), certificado de análisis y de calidad (CoA y CoQ), expedientes, folletos y otros documentos disponibles.
View Products on Sigmaaldrich.com
S7117
1000 ea  
Recuperando precio...
No pudo obtenerse el precio
La cantidad mínima tiene que ser múltiplo de
Maximum Quantity is
Al finalizar el pedido Más información
Ahorró ()
 
—
Solicitar precio
—
Disponibilidad a confirmar Disponibilidad a confirmar
Ingrese cantidad 
Suspendido
Cantidades limitadas disponibles
Debe confirmarse disponibilidad
    El resto: se avisará
      El resto: se avisará
      Se avisará
      Póngase en contacto con el Servicio de Atención al Cliente
      Contact Customer Service

       

      Póngase en contacto con el Servicio de Atención al Cliente

      Descripción

      Replacement Information
      Description
      Catalogue NumberS7117
      Brand Family Chemicon®
      Trade Name
      • ApopTag
      • Chemicon
      DescriptionApopTag® Plastic Coverslip
      OverviewAPOPTAG® Plastic Coverslips are designed to be custom fitted to the specific APOPTAG® kit application. Each coverslip has 2.5" x 1" dimensions.
      References
      Product Information
      HS Code3822 19 90
      Quality LevelMQ100
      Applications
      ApplicationAPOPTAG Plastic Coverslips are designed to be custom fitted to the specific APOPTAG kit application.
      Application NotesPlastic coverslips can be used to assure that a constant volume of solution is applied per unit of specimen area. However, their handling time slows down the protocol. Each square centimeter of plastic coverslip will require the volume of reagent indicated in Table 5 (S7100, S7101) and Table 10 (S7110, S7111, S7160), so that the reagent volume applied per unit of tissue area can be held constant. The surface to be covered is always equal to the area of the plastic coverslip, not the area of the specimen.

      Plastic coverslips may be trimmed to any desired size and shape. The kit's yield of specimens will be reduced if larger than standard coverslips are used.

      When using ApopTag® Kits that contain the anti-digoxigenin antibodies (S7100, S7101, S7110, S7111), plastic coverslips can be used during the incubation steps with the following reagents: WORKING STRENGTH TdT, and the ANTI-DIGOXIGENIN ANTIBODY. When using the ApopTag® Fluorescein Direct Kit (S7160), the plastic coverslips can be used during incubation steps with WORKING STRENGTH TdT.

      A basic coverslip method is described as follows:

      To make a pair of "standard area" (~5 cm2) specimen coverslips, cut a plastic coverslip (provided) into two equal halves, and fold up a 1 cm handling tab across the width, then crease sharply (See Figure 3 in insert).

      Drain one slide for approximately 10 seconds, and then tap off drops on a paper towel on the benchtop. Blot back and sides of the slide with a folded wipe. Carefully blot the area around the tissue section or cells, or else vacuum up solution using a pipette attached to an aspirator vacuum.

      Apply reagent solution to one end of the area to be covered, using a dropper bottle or pipette as required.

      Grasp the plastic coverslip by the handling tab and touch its opposite end to the droplet of reagent on the slide. Slightly arching the coverslip, roll it slowly downward, causing the solution to spread by capillary action. If solution does not spread evenly, tilt the slide until the flow reaches all edges.

      Apply plastic coverslips to microscope slides so as to minimize trapped air bubbles, which may cause variable enzyme reaction or detection.

      Place the slide across the pipettes, face-up and level, inside the humidified chamber. The slide edges should not touch anything so as to prevent drainage of the reagent.
      Biological Information
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Usage Statement
      • Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
      Storage and Shipping Information
      Storage ConditionsStore at room temperature.
      Packaging Information
      Material Size1000 ea
      Transport Information
      Supplemental Information
      Specifications
      Global Trade Item Number
      Número de referencia GTIN
      S7117 08436037122644

      Documentation

      ApopTag® Plastic Coverslip Certificados de análisis

      CargoNúmero de lote
      APOPTAG® PLASTIC COVERSLIP 2931165
      APOPTAG® PLASTIC COVERSLIP 3156778
      APOPTAG® PLASTIC COVERSLIP 3157547
      APOPTAG® PLASTIC COVERSLIP 2839840
      APOPTAG® PLASTIC COVERSLIP 3016681
      APOPTAG® PLASTIC COVERSLIP 2953816
      APOPTAG® PLASTIC COVERSLIP - 3238457 3238457
      APOPTAG® PLASTIC COVERSLIP - 3316686 3316686
      APOPTAG® PLASTIC COVERSLIP - 3385811 3385811
      APOPTAG® PLASTIC COVERSLIP - 3489755 3489755
      Show more