Millipore Sigma Vibrant Logo

345818 RapidStep™ ECL Reagent

RapidStep™ ECL Reagent: Ficha de datos de seguridad (MSDS o SDS), certificado de análisis y de calidad (CoA y CoQ), expedientes, folletos y otros documentos disponibles.

Sinónimos: Chemiluminescent Substrate, Single Step

View Products on Sigmaaldrich.com
345818
  
Recuperando precio...
No pudo obtenerse el precio
La cantidad mínima tiene que ser múltiplo de
Maximum Quantity is
Al finalizar el pedido Más información
Ahorró ()
 
—
Solicitar precio
—
Disponibilidad a confirmar Disponibilidad a confirmar
Ingrese cantidad 
Suspendido
Cantidades limitadas disponibles
Debe confirmarse disponibilidad
    El resto: se avisará
      El resto: se avisará
      Se avisará
      Póngase en contacto con el Servicio de Atención al Cliente
      Contact Customer Service

       

      Póngase en contacto con el Servicio de Atención al Cliente

      Descripción

      Replacement Information
      Description
      Overview

      This product has been discontinued.



      A single component reagent for chemiluminescent detection of immobilized proteins, labeled with horseradish peroxidase, by immunoblotting. Provides a bright, stable signal with low signal:background. Does not require mixing of substrate and enhancer solutions. Volume is sufficient for covering up to 2000 cm2 of membrane.
      Catalogue Number345818
      Brand Family Calbiochem®
      SynonymsChemiluminescent Substrate, Single Step
      Application Data
      Various amounts of mouse IgG, as indicated above, were dot blotted onto nitrocellulose. The protein was probed with a 1:5000 dilution of anti-mouse IgG HRP labeled antibody. RapidStep™ ECL Reagent is applied with a spray bottle as show below. Exposure time = 3 min.
      OverviewRapidStep™ ECL is a 1 STEP chemiluminescent substrate reagent for detection of horseradish peroxidase (HRP) on immunoblots. It is a convenient, cost-effective, and ready-to-use reagent that provides a superior, longer-lasting signal than traditional ECL reagents.

      RapidStep™ contains luminol and enhancer combined in one solution and is ready-to-use without mixing. A spray bottle is used to apply the solution directly onto the membrane.
      References
      Product Information
      FormLiquid
      Applications
      Application NotesImmunoblotting
      Application CommentsTo achieve an optimal signal:noise ratio, it is necessary to optimize the concentration of primary and secondary antibodies.
      Protocol for Use
      1. Remove the membrane containing immobilized proteins from the last wash and place on a flat surface, protein side facing up. Do not allow the membrane to dry
      2. Spray RapidStep™ ECL Reagent on the surface of the membrane to sufficiently cover the entire membrane. Gently shake the container to ensure the membrane is evenly covered. Generally 2 sprays are sufficient to cover a 5 cm x 5 cm area.
      3. Incubate the membrane for 1 min at room temperature without agitation. Proteins with low specificity or low reactivity with the primary antibody may require longer incubation times.
      4. Drain the excess RapidStep™ ECL Reagent by holding the membrane vertically and touch the edge of the membrane against absorbent paper. Failure to drain sufficiently may lead to high background.
      5. Wrap the membrane in plastic wrap and gently smooth out air pockets.
      6. Place the membrane in a film cassette, protein side facing up.
      7. Place X-ray film on top of the membrane, close the cassette and expose for an appropriate period of time. Optimal exposure times should be determined for each experiment.
      Biological Information
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      R PhraseR: 36/38

      Irritating to eyes and skin.
      S PhraseS: 26-36-45

      In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
      Wear suitable protective clothing.
      In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
      Product Usage Statements
      Storage and Shipping Information
      Ship Code Blue Ice Only
      Toxicity Irritant
      Storage +2°C to +8°C
      Protect from Light Protect from light
      Do not freeze Ok to freeze
      Packaging Information
      Transport Information
      Supplemental Information
      Specifications
      Global Trade Item Number
      Número de referencia GTIN
      345818 0

      Documentation

      Licencias necesarias

      Título
      PRODUCTO REGULADO POR LA SECRETARÍA DE SALUD

      RapidStep™ ECL Reagent Ficha datos de seguridad (MSDS)

      Título

      Ficha técnica de seguridad del material (MSDS) 

      RapidStep™ ECL Reagent Certificados de análisis

      CargoNúmero de lote
      345818
      Ficha técnica

      Note that this data sheet is not lot-specific and is representative of the current specifications for this product. Please consult the vial label and the certificate of analysis for information on specific lots. Also note that shipping conditions may differ from storage conditions.

      Revision19-November-2009 RFH
      SynonymsChemiluminescent Substrate, Single Step
      ApplicationImmunoblotting
      Application Data
      Various amounts of mouse IgG, as indicated above, were dot blotted onto nitrocellulose. The protein was probed with a 1:5000 dilution of anti-mouse IgG HRP labeled antibody. RapidStep™ ECL Reagent is applied with a spray bottle as show below. Exposure time = 3 min.
      DescriptionA single component reagent for chemiluminescent detection of immobilized proteins, labeled with horseradish peroxidase, by immunoblotting. Volume supplied is sufficient for covering up to 2000 cm2 of membrane.
      FormLiquid
      CommentsTo achieve an optimal signal:noise ratio, it is necessary to optimize the concentration of primary and secondary antibodies.
      Protocol for Use
      1. Remove the membrane containing immobilized proteins from the last wash and place on a flat surface, protein side facing up. Do not allow the membrane to dry
      2. Spray RapidStep™ ECL Reagent on the surface of the membrane to sufficiently cover the entire membrane. Gently shake the container to ensure the membrane is evenly covered. Generally 2 sprays are sufficient to cover a 5 cm x 5 cm area.
      3. Incubate the membrane for 1 min at room temperature without agitation. Proteins with low specificity or low reactivity with the primary antibody may require longer incubation times.
      4. Drain the excess RapidStep™ ECL Reagent by holding the membrane vertically and touch the edge of the membrane against absorbent paper. Failure to drain sufficiently may lead to high background.
      5. Wrap the membrane in plastic wrap and gently smooth out air pockets.
      6. Place the membrane in a film cassette, protein side facing up.
      7. Place X-ray film on top of the membrane, close the cassette and expose for an appropriate period of time. Optimal exposure times should be determined for each experiment.
      Storage Protect from light
      +2°C to +8°C
      Do Not Freeze Ok to freeze
      Toxicity Irritant